Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
DIGI POT 2 Click is a mikroBUS™ add-on board with a single channel digital potentiometer TPL0501 with 256 wiper positions.
This is a crimp pin for the ZH-6 JST [connector](http://www.sparkfun.com/commerce/product_info.php?products_id=9690), which c…
**Replacement:**[PRT-10161](http://www.sparkfun.com/products/10161). The MAX1555 was discontinued. We have a new version usin…
The SparkFun Photon Battery Shield provides you with an easy way to power your Photon module with a Lithium Polymer (LiPo) ba…
**Replacement:** None. We are looking for a new supplier for these, but don't have a replacement yet. This page is for refere…
Let our failure be your creation. We've got quite a stack of coasters - these are PCBs that were retired because of hardware …
Earthquake Click carries D7S, the world’s smallest high-precision seismic sensor from Omron.
Sparkle is Aniomagic's avant-garde way to make interactive textiles, paper, ceramics, and environments. These lightboards com…
IR Grid Click is a thermal imaging sensor. It has an array of 64 very sensitive factory calibrated IR elements (pixels).
TouchKey 3 Click uses the AT42QT1110, an 11-key QTouch® Touch Sensor IC from Microchip.
DC MOTOR 5 Click carries the DRV8701 brushed DC motor gate driver from Texas Instruments.
Vibro Motor 2 Click is a compact add-on board that makes an ideal solution for adding simple haptic feedback in any design.
Timer Click is a mikroBUS™ add-on board with Analog’s DS1682 total elapsed time recorder.
The SparkFun Inventor’s Kit (SIK) for micro:bit is a great way to get creative, connected and coding with the micro:bit. Th…
These 8" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for ax…
This is the same product as the [OpenLog](https://www.sparkfun.com/products/9530). The difference is this version comes in fa…
**Replacement:**[SEN-09812](http://www.sparkfun.com/products/9812). The new version of this board replaces the MMA7260 Accele…
Calling all fashion moguls: Here is your chance to play with the most experimental materials in 21st Century fashion! This is…
**Replacement:**[SEN-09836](http://www.sparkfun.com/products/9836). We added an extra decoupling cap and some mounting holes.…
**Replacement:**[DEV-09952](http://www.sparkfun.com/products/10174). This kit has been replaced with a newer version. The new…
Metal is out, Ceramic is in! This four pack of Slice blades are made of 100 percent hand-sharpened zirconium oxide and featur…
These 10" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When u…
You probably recognize these StratoGrey static shielding bags. Not only do we use them to protect our more sensitive componen…
These standard rotation 3.8:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard si…
This simple Transistor Array pack contains three SMD ULN2803 ICs from Texas Instruments. Each of these tiny ICs consists of e…
This is a large sized RGB LED Matrix with a backpack that has been designed to take SPI serial input and display any graphics…
**Replacement:**[ROB-09238](http://www.sparkfun.com/commerce/product_info.php?products_id=9238). This page is for reference o…
The Arcade MegaWing is an opensource add-on for the Papilio FPGA development platform that gives you all the hardware you'll …
**Replacement:**[SEN-10530](http://www.sparkfun.com/products/10530). We are no longer carrying this breakout board but we do …
The SparkFun Qwiic Shield for Arduino Nano makes it so you can use SparkFun's Qwiic connect ecosystem with development boards…
The pi-topCEED is a DIY desktop computer that helps you start learning how to code, create awesome devices and take your know…
H-Bridge Driver 2 Click is a compact add-on board that contains an H-bridge gate driver, also known as a full-bridge pre-driv…
These 9" long stainless steel shafts have a diameter of 5/16". These shafts are solid, which makes them an ideal choice for a…
These 9" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for ax…
These clear pink precision disk wheels have an outer diameter of 3”, a width of 0.23”, and utilize the 0.77” hub patter…
This is the same type of potentiometer you might find on some car stereos. This is a simple 10K potentiometer with a push-loc…
**Replacement:** None. We no longer sell this development board but if you're still interested in playing MP3 files, take a l…
This new revision of the SparkFun MP3 player shield retains the awesome MP3 decoding abilities of the last version but adds t…
We've retired this version but don't fret! A new version of the BlackBoard is [here](https://www.sparkfun.com/products/15296)…
The tinyTILE, an Intel® Curie-based board, is a miniaturized adaptation Arduino/Genuino 101® board perfect for wearable and…
This is the RFduino CR2032 Coin Battery Shield, a small add-on board for the RFduino DIP module that supplies 2-3V to your wh…
Are you a Java or Android developer looking to add advanced hardware I/O capabilities to your Android or PC application? The …
Proximity 10 Click is a versatile proximity detection device on a Click board™.
The SparkFun Serial Controlled Motor Driver allows you to control up to two DC motors using a serial command interface. The s…
So you want your Arduino to surf the web but you don't have room for the Arduino board plus the Ethernet Shield. What do you …
EEPROM 8 Click is a compact add-on board that contains a highly reliable nonvolatile memory solution.
The ArduIMU+ V3 is the latest and greatest version of DIYDrones' smart IMU. This time they've made it smaller and faster by i…
Servos are awesome for robotics projects but they can be difficult to mount the way you want. Luckily, our brilliant Ministry…
