Thing Plus LogoThing Plus Logo

We'd love to say our Thing Plus boards come in all shapes and size; but they don't. Instead they come in the same form factor all with different specifications and peripherals to meet a robust variety of needs.

Rotating Image of Thing Plus ProductsRotating Image of Thing Plus Products

What Is A Thing Plus Board?


Thing Plus Board Schematic ImageThing Plus Board Schematic Image

Consistent Footprint

Commonly known as the Feather footprint, Thing Plus boards are 2.3" x .9" (58.42mm x 22.86mm). This small form factor is compatible with many of the shields on the market today.

Qwiic Connectors

Each of our Thing Plus boards has a 3.3 V Qwiic Connector to quickly interface with development boards, sensors, LCDs, relays, and more over I2C.

Abundant Options

There's a Thing for everyone. From Raspberry Pi's new RP2350 to the trusty ESP32, we have over a dozen options to suit your project's needs.

Keep up to date with Thing Plus boards.Keep up to date with Thing Plus boards.

The USB-C variant of ESP32 Thing Plus is a development board with an added MicroSD and a new voltage regulator to operate with a lower power draw.

Wireless Frequency Flash RAM Connector Processor
WiFi, Bluetooth 240 MHz 128Mb/16MB (external) 520kB SRAM USB-C Dual-core Tensilica LX6

The SparkFun ESP32 Thing Plus is the next step to get started with Espressif IoT ideations while still enjoying all the amenities of the ESP32 Thing Plus.

Wireless Frequency Flash RAM Connector Processor
WiFi, Bluetooth 240 MHz 128Mb/16MB (external) 520kB SRAM Micro-B USB Dual-core Tensilica LX6

The SparkFun ESP32 Thing Plus with U.FL allows you to get started with Espressif IoT ideations while still enjoying all the amenities of the ESP32 Thing.

Wireless Frequency Flash RAM Connector Processor
WiFi, Bluetooth 240 MHz 128Mb/16MB (external) 520kB SRAM Micro-B USB Dual-core Tensilica LX6

Break into the 5GHz spectrum with this Feather-compatible board featuring the ESP32-C5 with Dual-Band WiFi 6, Bluetooth 5, 8MB Flash, and 8MB PSRAM.

Wireless Frequency Flash RAM Connector Processor
2.4GHz & 5GHz WiFi 6, Bluetooth® 5 LE, Zigbee & Thread, and Matter 240 MHz 8MB 8MB PSRAM USB-C 32-bit RISC-V single-core

Control your IoT projects with the ESP32-C6. This Feather-compatible board features a RISC-V processor, WiFi 6, Bluetooth 5, Zigbee, and Thread connectivity.

Wireless Frequency Flash RAM Connector Processor
2.4GHz WiFi 6 and Bluetooth® 5 LE 160 MHz 16MB 512KB HP SRAM / 16KB LP SRAM USB-C 32-bit RISC-V single-core

The SparkFun ESP32-S3 Thing Plus adds a powerful and versatile IoT development platform to the Feather-footprint Thing Plus line.

Wireless Frequency Flash RAM Connector Processor
2.4GHz WiFi 6 and Bluetooth® 5 LE 240 MHz 4MB 2MB PSRAM USB-C Xtensa® Dual-Core 32-bit LX7

The SparkFun ESP32-S2 WROOM Thing Plus is a highly-integrated, Feather form-factor development board equipped with the 2.4 GHz WiFi SoC.

Wireless Frequency Flash RAM Connector Processor
WiFi 240 MHz 4MB embedded SPI 320kB SRAM USB-C Xtensa® Single-Core 32-bit LX7

With a 32-bit ARM® Cortex®-M4 RISC core, the SparkFun STM32 Thing Plus brings power and precision to your projects.

Wireless Frequency Flash RAM Connector Processor

No

168 MHz 1MB 192kB USB-C ARM Cortex-M4

With a 32-bit ARM Cortex-M4F MCU, the SparkFun SAMD51 Thing Plus is one of our most powerful microcontroller boards yet!

Wireless Frequency Flash RAM Connector Processor

No

120MHz 1MB 256kB SRAM Micro-B USB ARM Cortex-M4F

The SparkFun Artemis Thing Plus takes our popular Feather footprint and adds in the powerful Artemis module for ultimate functionality.

Wireless Frequency Flash RAM Connector Processor
Bluetooth 48MHz (96 capable) 1MB 384kB RAM USB-C ARM Cortex-M4F

The SparkFun RP2350 Thing Plus is a powerful wireless IoT board featuring the selectable-core RP2350, WiFi 4, Bluetooth 5.2, LiPo battery charging, and a Qwiic connector.

Wireless Frequency Flash RAM Connector Processor
WiFi 4, Bluetooth® 5.2, BDR (1 Mbps), EDR (2 or 3 Mbps) 150 MHz 16MB (external) 520kB SRAM, 8MB PSRAM USB-C Dual ARM® Cortex®-M3 and Hazard3 RISC-V

A low-cost, high performance board with flexible digital interfaces featuring the Raspberry Pi Foundation's RP2040.

Wireless Frequency Flash RAM Connector Processor

No

133 MHz 128Mb/16MB (external) 264kB SRAM USB-C ARM Cortex-M0+

The first easily accessible board of its kind that combines Matter and SparkFun’s Qwiic ecosystem for agile development and prototyping of Matter-based IoT devices.

Wireless Frequency Flash RAM Connector Processor
Bluetooth® 5.3, Matter, Thread, Multiple 802.15.4 Protocols 39 MHz 1536kB 256kB USB-C EFR32MG24 Wireless SoC & ARM-M33 Core

The XBee3 Thing Plus is an ultra-capable and easy way for getting into wireless device development with a chip antenna.

Wireless Frequency Flash RAM Connector Processor
WiFi 2.4 GHz 1MB 128kB Micro-B USB Silicon Labs EFR32MG SoC

The XBee3 Thing Plus is an ultra-capable and easy way for getting into wireless device development with a U.FL connector.

Wireless Frequency Flash RAM Connector Processor
WiFi 2.4 GHz 1MB 128kB Micro-B USB Silicon Labs EFR32MG SoC

Equipped with the u-blox NINA-B306 module which features the Nordic Semiconductor nRF52840 integrated Bluetooth® Low Energy (BLE 5.0) communication microcontroller.

Wireless Frequency Flash RAM Connector Processor
Bluetooth® 5.0 LE 64 MHz 1MB 250kB USB-C Arm® Cortex®-M4 processor

An integrated single-chip low-power dual-band wireless LAN and BLE 5.3 communication microcontroller with the ability to depower all subsystems to conserve as much power as possible.

Wireless Frequency Flash RAM Connector Processor
WiFi 802.11a/b/g/n (2.4GHz / 5GHz), Bluetooth® 5.3 LE Up to 200MHz M33 (Main Core), 20 MHz M23 (Low Power Core) 4MB 250kB USB-C Arm® Cortex®-M4 processor

The SparkFun expLoRaBLE Thing Plus is a Feather form-factor development board with the NM180100 system in package (SiP), from Northern Mechatronics.

Wireless Frequency Flash RAM Connector Processor
Bluetooth, LoRa 96 MHz 1MB on-chip 384kB USB-C Ambiq Apollo3

The SparkFun AzureWave Thing Plus is equipped with the AW-CU488 module which features the Realtek RTL8721DM integrated single-chip low-power dual-band wireless LAN communication controller.

Wireless Frequency Flash RAM Connector Processor
WiFi (2.4GHz / 5GHz) Up to 200MHz 32Mbit SPI 512KB SRAM and 4MB PSRAM USB-C ARMv8-M, Cortex-M33 & Cortex-M23

Clocking in at 200MHz, the SparkFun RA6M5 Thing+ is a high-performance development board ideal for real-time applications.

Wireless Frequency Flash RAM Connector Processor
Bluetooth® Low Energy 200MHz 2MB code/8kB data (built-in) / 16 MB/128Mb QSPI (on board) 512KB SRAM USB-C ARMv8-M, Cortex-M33 & Cortex-M23

SparkFun Qwiic Shield for Thing Plus

The SparkFun Qwiic Shield for Thing Plus makes it so you can use SparkFun's Qwiic Connect System with development boards that use the Feather footprint.

SparkFun Qwiic Shield for Thing PlusSparkFun Qwiic Shield for Thing Plus