avatar

Funda

Member Since: January 21, 2011

Country: United States

So we put more categories, forums, subforums, documentation, moderators, themes and stickies on the SparkFun forums than ever before!

Continue reading

  • Hmmm, I think we need to get additional information in order to assist you with your issue further. If you could, please consider posting on the SparkFun forums and a Forum Moderator will provide technical assistance shortly.

    Here is a very similar thread that seems to have an identical topic. I suggest you follow the thread and see if there is a resolution for your issues:

    https://forum.sparkfun.com/viewtopic.php?f=159&t=50757&p=207311&hilit=oled#p207311

  • Hello Bryan. Thank you for your comment. If you could send an Email to Support@SparkFun.com they can see if combining shipping across days is a possibility. We look forward to your massage and hope you have a great weekend!

  • If the second device is not working properly and your first screen is functional in a known good circuit that you tried with the second screen chances are the device could be bricked or defective. Please E-mail techsupport@sparkfun.com and we can take care of you.

  • Could you please E-mail techsupport@sparkfun.com regarding this question? We can assist you much better that way!

  • Unfortunately the tweezers do not have any grips on them. The tension produced due to the cross lock design is decent enough as it is.

  • The music wire used for this kit is 0.025"(.64mm) in diameter if anyone was curious.

  • This board does not come with the E-paper screen which is a retired product. If you need this device and the screen try looking at our distributors.

  • -------------------- Tech Support Tips/Troubleshooting/Common Issues --------------------

    On a side note, the sleeves on these probes make them hard to use with our SFE digital multimeters [ https://www.sparkfun.com/products/12966 ] but work with our other multimeter [ https://www.sparkfun.com/products/12967 ] and bench top power supplies flawlessly. I advise cutting off about 1/4" if you want them to work with TOL-12966.

  • Yes, you can "plug" them into a breadboard. They fit rather snug.

  • We do not sell these separately, unfortunately.