by Nick Poole
Everything I used in the HUB-ee Buggy robot build for the 4/19 New Product Post
Product | Subtotal | Qty | |
---|---|---|---|
HUB-ee Wheel - 180:1 Metric
ROB-11668 |
69.9 |
2
Cannot be ordered at this time. |
|
HUB-ee - Cable (150mm)
ROB-11672 |
3.95 |
1
Cannot be ordered at this time. |
|
Arduino ProtoShield - Bare PCB
DEV-11665 |
4.95 |
1
Cannot be ordered at this time. |
|
Angle Bracket - 4-40
PRT-10228 |
0.55 | 1 | |
Nut - Metal (4-40, 10 pack)
PRT-10454 |
1.6 | 1 | |
Screw - Phillips Head (1/2", 4-40, 10 pack)
PRT-10452 |
1.6 | 1 | |
Infrared Proximity Sensor - Sharp GP2Y0A21YK
SEN-00242 |
14.95 | 1 | |
Infrared Sensor Jumper Wire - 3-Pin JST
SEN-08733 |
1.6 | 1 | |
RedBoard - Programmed with Arduino
DEV-11575 |
24.95 |
1
Cannot be ordered at this time. |
|
Battery Holder - 4xAA to Barrel Jack Connector
PRT-09835 |
2.75 | 1 | |
Total: 126.8 |