Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Raspberry Pi makes very popular single-board computers, especially for those interested in programming with Scratch or Python. They've also recently made their own microcontroller board.
Learn all about Raspberry Pi Here
added to your cart!
This is a 12.5W Micro-USB Power Adapter with the US power prongs (100-240VAC). It's made for use with Raspberry Pi Zero 2 W, …
This 2x20 flat ribbon-cable fits the GPIO headers on the Raspberry Pi 3, 2, and B+ so you can easily connect to the low-level…
This 2x20 male header has the same number and spacing of pins as a Raspberry Pi but is best served when used in conjunction w…
This 8MP IR (Infrared) camera module is capable of 1080p video and still images and connects directly to your Raspberry Pi.
The Raspberry Pi Zero and Zero W are both equipped with a smaller CSI (Camera Serial Interface) port than on a full-sized Ras…
The Qwiic pHAT Extension for the RPi400 provides you with an easy way to access all GPIO, stack your favorite HAT upright or …
The SparkFun RP2040 mikroBUS Development Board is a low-cost, high performance platform with flexible digital interfaces feat…
The DAQCplate (Data Acquisition and Controller) from Pi-Plates adds a rich set of input/output options to your Raspberry Pi. …
The SparkFun Qwiic Kit for Raspberry Pi includes a shield with headers, three Qwiic-enabled breakout boards, and four cables …
The Kitronik Smart Air Quality Board for Pico provides a complete air monitoring and reporting solution for the Raspberry Pi …
The Argon NEO RPi 4 Case is a plastic and aluminum enclosure that properly protects and cools your Pi 4 without obstructing a…
The Kitronik Discovery Kit for Raspberry Pi Pico (Pico not included) is a great way to learn about microcontrollers, Python c…
If you're looking for a fully-featured Raspberry Pi 4 case, then look no further than the Argon ONE Pi 4 Raspberry Pi Case.
The Flirc Raspberry Pi Zero case has an aluminium casing with a core heatsink and smooth top, offering silent, passive and ef…
The Raspberry Pi 4 Basic Kit includes everything you'll need to get up and running with the Raspberry Pi 4 but without the bo…
This is the 6mm CS-mount wide angle lens from CGL Electronics Co. Ltd. for use with the Raspberry Pi HQ Camera Module.
This is a basic baseplate for the Raspberry Pi 3 B+. The baseplate is designed for the RPi to remain on the attached via fric…
The Raspberry Pi 4 Case Fan keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load.
The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it…
The SparkFun Raspberry Pi 4 Desktop Kit (4GB) includes everything you need to turn any monitor with an HDMI port into a deskt…
The IQaudIO Pi-DAC+ HAT Audio card for the Raspberry Pi delivers outstanding sonic performance and full-HD (24/192) audio cap…
The Pi Zero USB Stem is a PCB kit that turns a Raspberry Pi Zero into a USB dongle.
This is a USB Type-C Power Supply that is compatible with the Raspberry Pi 4.
The SparkFun Pi AVR Programmer HAT makes it easy to program AVRs directly from the SPI hardware pins on any Raspberry Pi.
The Sense HAT is an add-on board for Raspberry Pi with an 8×8 RGB LED matrix, a five-button joystick and a number of sensors…
The IQaudIO Pi-DigiAMP+ is the First HAT compliant Full-HD (192/24) HiFi quality DAC & up to 2x35w Class D amplifier for the …
The Argon ONE M.2 case features an M.2 interface for using M.2 (Key-B or Key-B&M) SATA solid state drives (not included).
The official case for the Raspberry Pi 4 from Raspberry Pi!
This black, anodised aluminium case for the Raspberry Pi 4 will give you 10-15°C of passive cooling under a full CPU load.
**Note:** This camera case does not currently fit the [Raspberry Pi Camera Module V2](https://www.sparkfun.com/products/14028…
This gunmetal, anodised aluminium case for the Raspberry Pi 4 will give you 10-15°C of passive cooling under a full CPU load…
The Pi Adaptor connects to the Raspberry Pi’s 40 pin interface, breaking out selected pins for use with the MatesBUS.
The IQaudio Codec Zero delivers bi-directional digital audio signals between Raspberry Pi Zero and its onboard Dialog Semicon…
This is a simple 48W (8V DC, 6A) power supply, designed for use with the Raspberry Pi Build HAT.
The Pimoroni Blinkt! is a "shield" for the Raspberry Pi, equipped with eight super-bright and addressable RGB LEDs that make …
The Raspberry Pi is THE new favorite of development platforms, so the last thing that you’d want is for something bad to ha…
This is the Antenna Kit for the Raspberry Pi 4 Compute Module wireless variants.
The Build HAT allows you to control LEGO® Technic™ devices with your favorite Raspberry Pi.
This blue, anodised aluminium case for the Raspberry Pi 4 will give you 10-15°C of passive cooling under a full CPU load.
This purple, anodised aluminium case for the Raspberry Pi 4 will give you 10-15°C of passive cooling under a full CPU load.
This adaptor allows you to power your RPi 4 with a previous usb-micro B power supply.
Pirate Audio Speaker is perfect for making a Lilliputian radio, sound effect player, or even as a teeny-weeny games console!
This the IQAudio XLR interface board from Raspberry Pi. This board is perfect for those wanting to work with peripheral with …
The Argon POLY+ Raspberry Pi 4 Case uses a three piece snap-fit plastic design to protect your Pi 4 in a cost-effective way.
Build your own home-brew iPod Nano with Pirate Audio Headphone Amp!
This 30mm no-solder, controllable CPU fan with RGB LED and tactile switch will give your Raspberry Pi significantly better th…
