Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Mon-Fri, 9am to 12pm and 1pm to 5pm U.S. Mountain Time:
(303) 284-0979
Raspberry Pi makes very popular single-board computers, especially for those interested in programming with Scratch or Python. They've also recently made their own microcontroller board.
Learn all about Raspberry Pi Here
added to your cart!
This adaptor allows you to power your RPi 4 with a previous usb-micro B power supply.
The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it…
**Note:** This camera case does not currently fit the [Raspberry Pi Camera Module V2](https://www.sparkfun.com/products/14028…
Perfect for home automation projects includes a relay, 3x buffered input & output, 3x analog input (all 24V rated), and a 0.9…
The Pimoroni Blinkt! is a "shield" for the Raspberry Pi, equipped with eight super-bright and addressable RGB LEDs that make …
This purple, anodised aluminium case for the Raspberry Pi 4 will give you 10-15°C of passive cooling under a full CPU load.
This blue, anodised aluminium case for the Raspberry Pi 4 will give you 10-15°C of passive cooling under a full CPU load.
A preposterous pile of peripherals on your Pi! The pHAT Stack - Fully Assembled Kit by Pimoroni is the ultimate way to add HA…
The PaPiRus is a HAT for the RPi that is capable of driving an ePaper display with ease by making use of the existing open so…
This 2x20 shrouded header has the same number and spacing of pins as a Raspberry Pi so you can easily connect via ribbon cabl…
This is a basic baseplate for the Raspberry Pi 3 B+. The baseplate is designed for the RPi to remain on the attached via fric…
The DAC on Pirate Audio Line-out gives you crisp 24-bit / 192KHz digital audio through its 3.5mm stereo jack.
The Argon POLY+ Raspberry Pi 4 Case uses a three piece snap-fit plastic design to protect your Pi 4 in a cost-effective way.
Pirate Audio Speaker is perfect for making a Lilliputian radio, sound effect player, or even as a teeny-weeny games console!
Build your own home-brew iPod Nano with Pirate Audio Headphone Amp!
This 2x13 flat ribbon-cable fits the GPIO headers on the Raspberry Pi so you can easily connect to the low-level peripherals …
Bring an old radio or set of speakers into the 21st century with Pirate Audio 3W Stereo Amp for Raspberry Pi!
This 2x13 shrouded header has the same number and spacing of pins as the Raspberry Pi so you can easily connect via ribbon ca…
These 0.1" spaced female headers are perfect for building your own Raspberry Pi B add-on modules. These PTH headers are arran…
Crafted out of five unique layers including a transparent top and base that leave your beautiful Pi visible inside. Each laye…
Pibow Coupé. The slim, hackable, and attractive case for the Raspberry Pi! Crafted out of five unique layers including a…
The SparkFun Raspberry Pi 4 Desktop Kit (2GB) includes everything you need to turn any monitor with an HDMI port into a deskt…
This module allows a designer to leverage the Raspberry Pi hardware and software stack in their own custom systems and form f…
It's ideal for prototyping projects without the need for complicated wiring, soldering, or breadboards.
A 32 GB microSD card pre-imaged with Debian.
A 5.0" capacitive touch LCD display for the raspberry pi.
The gen4-4DPi range are Primary Display’s for the Raspberry Pi A+, B+, Pi2, Pi3, Pi3 B+, Pi Zero and Pi Zero W.
7.0", 800x480 pixels, slim Intelligent Display Module with embedded DIABLO16 processor and Hardware Interface for the Raspber…
This 9.0” Diablo16 Integrated Display Module is part of the microLCD range of modules Designed and Manufactured by 4D Syste…
Swissbit Secure Boot Solution for Raspberry Pi consists of PS-45u DP microSDHC memory cards and PU-50n DP USB flash drive. Th…
The PoE+ HAT allows you to power your Raspberry Pi using Power over Ethernet networks with up to 25.5 Watts (PoE+) over CAT5 …
The Raspberry Pi Zero W is still the Pi you know and love, but at a largely reduced size of only 65mm long by 30mm wide and s…
This is a 9.0" LCD display module with resistive touch for Raspberry Pi starter kit.
The pi-topCEED is a DIY desktop computer that helps you start learning how to code, create awesome devices and take your know…
UNO-220 is designed for customers using Raspberry Pi (RPi) single-board computers (SBCs) in unique IoT applications.
Starter Kit for 9.0", 800 x 480 pixels, Intelligent Display Module with Capacitive Touch for Raspberry Pi.
A 7.0" capacitive touch LCD display for the raspberry pi.
The Unicorn HAT HD crams 256 RGB LEDs, in a 16x16 matrix, onto a single HAT.
Build your very own internet-connected radio with the Pirate Radio Kit.
The IQaudIO Pi-DigiAMP+ is the First HAT compliant Full-HD (192/24) HiFi quality DAC & up to 2x35w Class D amplifier for the …
A high-resolution, high-speed 4.0" TFT display for your Raspberry Pi with capacitive multi-touch!
The Automation HAT is a home monitoring and automation controller featuring relays, analog channels, powered outputs, and buf…
The Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces featuring the ne…
