Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Raspberry Pi makes very popular single-board computers, especially for those interested in programming with Scratch or Python. They've also recently made their own microcontroller board.
Learn all about Raspberry Pi Here
added to your cart!
The Raspberry Pi 4 Basic Kit includes everything you'll need to get up and running with the Raspberry Pi 4 but without the bo…
A kit with basic components for using the Raspberry Pi 5 including a power supply, microSD card, and HDMI display cable.
W5500-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and fully hardwired TCP/IP controller W…
The SparkFun Raspberry Pi 4 Desktop Kit (4GB) includes everything you need to turn any monitor with an HDMI port into a deskt…
This is the SparkFun Pi Wedge, a small board that connects to the 40-pin GPIO connector on the Raspberry Pi and breaks the pi…
The Raspberry Pi 4 Basic Kit includes everything you'll need to get up and running with the Raspberry Pi 4 2GB.
The Raspberry Pi Camera Module 3 is the latest entry in our mainstream camera line-up, and the successor to the popular Came…
The SparkFun Raspberry Pi Zero W Basic Kit provides everything you need to start with this miniaturized Pi without breaking t…
Everything you will need to get started using the Raspberry Pi 400; power adaptor, wired mouse, micro HDMI to HDMI, guidebook…
The HQ Camera Module is a camera sensor designed to accept CS-mount lenses and, with the supplied adapter, C-mount lenses for…
Based on the 16MP Sony IMX519 sensor, this new camera module gives all Raspberry Pi hackers every bit of power they need to b…
A kit that includes all the male headers needed for your Raspberry Pi Pico board.
The SparkFun Raspberry Pi Zero W Camera Kit provides you with a pan/tilt camera controlled via a Raspberry Pi Zero W.
A kit with the Raspberry Pi 5 - 4GB and an active cooler and case. Fundamental new parts around the Raspberry Pi 5.
The Raspberry Pi Zero and Zero W are both equipped with a smaller CSI (Camera Serial Interface) port than on a full-sized Ras…
This is a 12.5W Micro-USB Power Adapter with the US power prongs (100-240VAC). It's made for use with Raspberry Pi Zero 2 W, …
The SparkFun Servo pHAT for Raspberry Pi allows your Raspberry Pi to control up to 16 servo motors in a straightforward manne…
The Raspberry Pi Zero W is still the Pi you know and love, but at a largely reduced size of only 65mm long by 30mm wide and s…
A Lithium battery specifically designed for operating the real time clock (RTC) on the Raspberry Pi 5.
The Raspberry Pi Zero W is still the Pi you know and love, but at a largely reduced size of only 65mm long by 30mm wide and n…
The Raspberry Pi Zero Case has been designed to fit both the Pi Zero and the Pi Zero W. These official cases consist of sever…
This is the 16mm C-mount telephoto lens from CGL Electronics Co. Ltd. for use with the Raspberry Pi HQ Camera Module.
The official case for the Raspberry Pi 4 from Raspberry Pi!
The Raspberry Pi Debug Probe is an inexpensive, all-in-one USB to serial debug and UART bridge.
The Raspberry Pi High Quality Camera M12 Mount is the same high quality camera as the previous model but with an M-12 lens mo…
The Raspberry Pi 4 Case Fan keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load.
The Kitronik Autonomous Robotics Platform for Raspberry Pi Pico is a fun and hands-on introduction to buggy robotics.
The Raspberry Pi Pico H is a low-cost, high-performance microcontroller board with flexible digital interfaces featuring the …
This is a pretty straight-forward HAT for bringing simple cluster computing to the Raspberry Pi A+ and B+ lines.
This 8MP IR (Infrared) camera module is capable of 1080p video and still images and connects directly to your Raspberry Pi.
This is the 6mm CS-mount wide angle lens from CGL Electronics Co. Ltd. for use with the Raspberry Pi HQ Camera Module.
This 2x20 shrouded header has the same number and spacing of pins as a Raspberry Pi so you can easily connect via ribbon cabl…
The Raspberry Pi 400 is a complete Raspberry Pi 4-based personal computer, integrated into a keyboard.
The Compute Module 4 packs all the best features of the Raspberry Pi Model B 4 into a more favorable form-factor for embedded…
The Pi Zero USB Stem is a PCB kit that turns a Raspberry Pi Zero into a USB dongle.
A 200mm MIPI Cable for interfacing the Raspberry Pi Camera Modules with the Raspberry Pi 5.
The Build HAT allows you to control LEGO® Technic™ devices with your favorite Raspberry Pi.
The Raspberry Pi Global Shutter Camera is a specialized 1.6-megapixel camera from Raspberry Pi that is able to capture rapid…
This is a simple 48W (8V DC, 6A) power supply, designed for use with the Raspberry Pi Build HAT.
The Compute Module 4 plugs right into the I/O Board and provides a multitude of inputs and outputs for prototyping or evaluat…
This is a USB Type-C Power Supply that is compatible with the Raspberry Pi 4.
This module allows a designer to leverage the Raspberry Pi hardware and software stack in their own custom systems and form f…
This is the Antenna Kit for the Raspberry Pi 4 Compute Module wireless variants.
The Kitronik Discovery Kit for Raspberry Pi Pico (Pico not included) is a great way to learn about microcontrollers, Python c…
This is a basic baseplate for the Raspberry Pi 3 B+. The baseplate is designed for the RPi to remain on the attached via fric…
The Qwiic pHAT Extension for the RPi400 provides you with an easy way to access all GPIO, stack your favorite HAT upright or …