Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
Cygbot's 2D/3D Dual Solid-State ToF LiDAR helps translate the 3D world into a 2D image and a 3D object using precisely measur…
This great GT-521F52 fingerprint module from ADH-Tech communicates over TTL Serial so you can easily embed it into your next …
The TFMini is a ToF, Qwiic-enabled LiDAR sensor capable of measuring the distance to an object as close as 30 centimeters and…
The MyoWare® 2.0 Power Shield is designed to easily power the MyoWare 2.0 Muscle Sensor remotely.
The MPU-6050 is a serious little piece of motion processing tech! By combining a MEMS 3-axis gyroscope and a 3-axis accelerom…
The Type 5 Pocket Geiger Radiation Sensor from [Radiation Watch](http://www.Radiation-Watch.org) is a highly sensitive radiat…
The AS7341 is an 11-channel spectral sensor from AMS that covers wavelengths between 350nm to 1000nm. It features eight chann…
The SparkFun Air Velocity Sensor Qwiic Kit comes with everything you need to get started using the FS3000-1005 Air Velocity S…
Great for detecting motion in a small area & optimized for small movements to offer motion-sensing options for continuously p…
The eTape Liquid Level Sensor from Milone Technologies is a great way to measure the level of a liquid. It has a resistive ou…
These tags operate in the UHF (865MHz to 928MHz) band and contains a 96-bit EPC field that is programmable by the user.
The SparkFun CCS811/BME280 Environmental Combo Breakout takes care of all your atmospheric-quality sensing needs with the pop…
Great for detecting motion in a small area and optimized for small movements to offer motion-sensing options for battery powe…
This non-contact infrared thermometer makes it a breeze to take quick and accurate surface temperature readings without getti…
The MB2530 Ultrasonic Rangefinder from Maxbotix is a high performance sensor for monitoring distance and proximity within 50c…
The Sense HAT is an add-on board for Raspberry Pi with an 8×8 RGB LED matrix, a five-button joystick and a number of sensors…
The 8BitDo SN30 Pro Bluetooth Gamepad is the worlds first, fully featured retro controller.
The SDP31 differential pressure sensor is ideally suited to air flow rate and air speed measurement. Need an air speed indica…
MIKROE NDIR CO2 Click is an advanced integrated CO2 gas sensor system, which is able to measure an absolute CO2 concentration…
The SparkFun Touch Potentiometer, or Touch Pot for short, is an intelligent linear capacitive touch sensor that implements po…
MIKROE LDC1000 Click carries the world's first inductance-to-digital converter IC, along with a detachable sensor.
MIKROE LDC1101 Click is an inductance-to-digital converter Click Board™.
The SparkFun gator:UV micro:bit Accessory Board is an ultraviolet sensing solution created to interface with the micro:bit as…
MIKROE Fan 8 Click is a compact add-on board that represents a compliant fan controller.
ProxFusion Click is a multifunctional capacitive and Hall-effect sensor device.
MIKROE Altitude 4 Click introduces an absolute pressure sensor with digital output for low-cost applications labeled as NPA-2…
The measuring range is between 10 and 150 cm. The Click is designed to run on either 3.3V or 5V power supply.
MIKROE Thunder Click features AS3935 lightning sensor as well as MA5532 coil antenna.
This is the MyoWare Proto Shield, a simple proto-board for your MyoWare Muscle Sensor. With this shield you will be able to u…
This Click board™ allows users to secure their projects with a biometric all-in-one fingerprint sensor.
MIKROE Touchkey Click has four capacitive pads powered by TTP224, a touchpad detector IC.
This is the Vernier Gas Pressure Sensor, an easy to operate tool that can be used to monitor pressure changes of a gaseous el…
This is the Mindwave Mobile from NeuroSky, an [EEG](http://en.wikipedia.org/wiki/Electroencephalography) headset that safely …
This new version adds 2 standoff holes as well as an extra decoupling capacitor. Breakout board for the Analog Device ADXL345…
This is a simple breakout for the ADXL345 accelerometer and the ITG-3200 MEMS gyro. With this board, you get a full 6 degrees…
This is the Vernier Motion Detector, a simple sensor that can be used to collect position, velocity and acceleration data of …
This is an evaluation board for the ADXL345 three-axis MEMS accelerometer. The ADXL345 is an awesome little accelerometer, ca…
This is the LIDAR Lite, a compact high performance optical distance measurement sensor from PulsedLight.
This is the Vernier Photogate, a new take on the traditional photogate. By emitting a beam of infrared light from one upright…
Freescale’s MAG3110 is a small, low-power, digital 3-axis magnetometer. The device can be used in conjunction with a 3-axis…
The SparkFun 9DOF Sensor Stick is a very small sensor board with 9 degrees of freedom. It includes the ADXL345 accelerometer,…
This is a breakout board for the L3G4200D low-power three-axis angular rate sensor. The L3G4200D is a MEMS motion sensor and …
This is a breakout board for the Bosch BMP180 high-precision, low-power digital barometer. The BMP180 offers a pressure measu…
The Electrically Isolated USB EZO™ Carrier Board allows you to connect your Atlas Scientific circuit directly to your compu…
The TF03 is a ToF LiDAR capable of measuring the distance to an object from 10 cm to 180M and has been designed with an IP67 …
Granted, using our muscles to control things is the way that most of us are accustomed to doing it. We push buttons, pull lev…
This analog panel meter measures DC current from 0-20mA with 5% accuracy. It has a clear and easy to read scale and an adjust…
This is not your typical temperature sensor. The TMP006 Breakout can measure the temperature of an object without making cont…