Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
The FabFM is a stylish FM radio kit that you can build with just basic soldering tools! The PCB is all PTH, meaning that even…
The VS1011 is a great MP3 decoder, and with this breakout board, it's easy to drop it into any project. The VS1011 is capable…
This is SparkFun Terror-Min, the wonderful toy to annoy and bring terror to the most patient parents. It's a simple kit based…
The SparkFun MIDI Shield board gives your Arduino access to the antiquated, but still widely used and well supported [MIDI co…
The SparkFun VoiceBox Shield can be mounted on top of your Arduino board to give it access to all of the capabilities of the …
This is the same product as the [Mono Audio Amp Breakout](https://www.sparkfun.com/products/11044). The difference is this ve…
Do you make time to talk to your Arduino? Maybe you should! The EasyVR Shield 2.0 is a voice recognition shield for Arduino b…
The PCM1803A is a high-performance, low-cost, 24-bit stereo analog-to-digital converter that can sample as high as 96k. The P…
2x5W AMP Click functions as an amplifier and features the TDA7491LP 2x5-watt dual BTL class-D audio amplifier.
Handmade Electronic Music: The Art of Hardware Hacking provides a long-needed, practical, and engaging introduction to the cr…
This is a very thin flexible speaker with included amplifier, perfect for wearable applications where you need a little sound…
Ready to add audio to your next project? This small breakout board couples a small electret microphone with a 100x opamp to a…
The SparkFun Qwiic MP3 Trigger takes care of all the necessary requirements for playing sound files, all you need to do is se…
You may recognize these as the connectors that are commonly used for home stereo speakers. They happen to make good spring te…
The Spectacle Audio Board allows you to add sound from a microSD card to your Spectacle projects. Each board accepts a microS…
The Little Soundie is a tiny audio playback device breaking out the VS1000D audio codec IC allowing this board the ability to…
GainAMP Click carries the LTC6912 dual channel, low noise, digitally programmable gain amplifier (PGA).
This is the CUhead Pro, a WiFi/Ethernet Arduino shield with Airplay and DLNA audio and also acts as an access point for WiFi …
The TTS256 is an 8-bit microprocessor programmed with letter-to-sound rules. This built-in algorithm allows for the automatic…
The SparkFun SparkPunk Sequencer is a musical control voltage sequencer designed to control the SparkPunk Sound Kit. With the…
The Chiclet Sound Kit is Aniomagic's avant-garde way to make interactive textiles, paper, ceramics, and environments. They've…
The JustBoom Amp HAT is a high-quality audio amplifier designed specifically for the Raspberry Pi. Digital-to-analog conversi…
The JustBoom Digi HAT is a high-resolution digital audio output add-on board for the Raspberry Pi. Simply stack the plug-and-…
The pi-topSPEAKER allows you to turn up the volume on your pi-top or pi-topCEED. This audio board provides a simple way to in…
The ReSpeaker 4-Mic Array is a quad-microphone expansion board for Raspberry Pi designed for AI and voice applications.
Do you make time to talk to your Arduino? Maybe you should! The EasyVR Shield 3.0 is a voice recognition shield for Arduino b…
This tiny breakout board features the ADMP401 MEMS microphone. One of the key advantages to this breakout and microphone is t…
Based on a new generation ARM Cortex M7, the Tsunami extends polyphony to 32 mono or 18 stereo simultaneous uncompressed 44.1…
AudioAmp 3 Click is a stereo audio amplifier, capable of delivering up to 79W per channel with the 4Ω load.
The WTV020SD is a small, simple IC for embedding audio-playback into your next project. These devices are commonly used in ch…
The SpeakJet is a completely self-contained, single-chip voice and complex sound synthesizer. It uses a mathematical sound al…
The SparkFun SparkPunk Kit is a sound generator made in the spirit of the Atari Punk Console. Rather than simply recreating t…
Plug this small microphone into a USB port and add microphone functionality without any additional drivers.
MIKROE FM Click with it’s Si4703 IC is a complete FM radio tuner in the form of add-on board.
The SparkFun Edge 2 Development Board powered by TensorFlow is perfect begin using voice recognition without relying on the s…
The DAC on Pirate Audio Line-out gives you crisp 24-bit / 192KHz digital audio through its 3.5mm stereo jack.
If you want to get some sound out of your project but have a tight space budget, this is a good way to do it. This 0.25W, 8Oh…
Bring an old radio or set of speakers into the 21st century with Pirate Audio 3W Stereo Amp for Raspberry Pi!
This is a 4-pin microphone voice sound sensor module based around the LM393 chip.
This is a passive speaker buzzer module with sound frequency control.
This RN-52 Bluetooth from Roving Network is an audio module that provides a highly integrated solution for delivering high qu…
Build your own home-brew iPod Nano with Pirate Audio Headphone Amp!
Ever wish your project could just speak up and *tell *you what's going on? Why not give it a voice? The Emic-2 Text-to-Speech…
The LM358 is a great, easy-to-use dual-channel opamp. Opamps have so many [applications](http://en.wikipedia.org/wiki/Operati…
Simple RCA jack. Can be used on any project requiring RCA Audio, Video, or simple analog transmission.
This is a standard 3.5mm stereo jack with no frills. Panel mount in a 6mm diameter hole for a nice clean headphone, microphon…
The RN-52 Bluetooth from Roving Networks is an audio module that makes it simple for you to create a hands free audio system …
BT Audio 3 Click is a compact add-on board with high-performing voice and audio post-processing capability for Bluetooth audi…
