Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
These 10" long stainless steel shafts have a diameter of 3/8". These shafts are solid, which makes them an ideal choice for a…
**Replacement:** None. We no longer carry this board, however we do still carry the 'Nokia' LCD as both a [breakout board](ht…
This is a 1.75" long JST SH communication cable which can be cut and hacked to your needs and can even be used as pigtails
This is a 5 wire cable with a SHR style (1mm pitch) connector on each end. These are very similar to our Qwiic connectors and…
The SparkFun Raspberry Pi Qwiic Kit includes a shield with headers, two Qwiic-enabled breakout boards, and three cables to he…
These orange precision disk wheels have an outer diameter of 4”, a width of 0.23”, and utilize the 0.77” hub pattern. T…
**Replacement:**[BOB-09943](http://www.sparkfun.com/products/9943). We've sold out of the "greenwired" boards, but the revise…
You don’t have the power? Well, there’s no need to ask Scotty – the SparkFun Benchtop Power Board Kit has your back. Th…
Who needs a whole bag full of instruments just to do some debugging? Why can't your logic analyzer and your DSO be the same b…
**Replacement:** None. Maker Faire is over, we don't have any more tickets. And even if we did have tickets, there's no show …
These 7" long stainless steel shafts have a diameter of 5/16". These shafts are solid, which makes them an ideal choice for a…
The Electrically Isolated USB EZO™ Carrier Board allows you to connect your Atlas Scientific circuit directly to your compu…
We've all seen toys and things that change color when you run them under warm water or heat them up in the sun. Some of us we…
**Replacement:** None. We don't carry this kit any more, but we do have plenty of other fun and educational kits in our [kits…
The Qwiic Starter Kit was designed to allow users to get started with Arduino without the need for soldering or breadboarding…
These plastic shaft spacers have an inner diameter of 1” and a thickness of 1/16”. These spacers are ideal for spacing ou…
The 7027 "BuckToot" LED Power Module is a true constant current regulated driver for LEDs. Unlike standard power supplies, wh…
**Replacement:** None. This part has been discontinued but have a look at the rest of our [proximity](http://www.sparkfun.com…
These servo shaft attachments are great when connected to your 3F Futaba servo spline and used in conjunction with a ServoBlo…
The Open Workbench Logic Sniffer is an open source logic analyzer with a USB interface. The hardware is designed for the [SUM…
OLA has [gone red](https://www.sparkfun.com/products/16832)! While the original black version is pretty cool, the new officia…
This 2x5 crimp connector snaps onto a 10-pin ribbon cable to form a dual-inline connection that can be pushed right into a br…
**Replacement:**[TOL-11704](https://www.sparkfun.com/products/11704). We're now carrying the FX-888D, an upgraded digital ver…
Combining the micro:bit with the SparkFun moto:bit carrier board creates a flexible, low-cost, Qwiic-enabled robotics platfor…
These 12" long aluminum tubes have an outer diameter of 1/2", an inner diameter of 0.444", and a wall thickness of 0.03". Whe…
**Replacement: **None. We are no longer selling these RGB strips, but check out the rest of our specialty [LEDs](https://www.…
These 8" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When us…
This is a M3 - 0.5x30mm Phillips Head Machine Screw.
The Little Soundie is a tiny audio playback device breaking out the VS1000D audio codec IC allowing this board the ability to…
The AST-CAN485 WiFi Shield provides a way for working wirelessly in automation, an environment famous for being noisy and unf…
Gone are the days that you have to worry about silicone water proofing splitting and breaking on you! These are sealed addres…
**Replacement: **None. We do not have a direct replacement for these. This page is for reference only. The Luxeon Portable L…
The RPI-1031 tilt sensor is capable of sensing a change in orientation in four different directions: forward, back, left or r…
**Replacement:** None. We are no longer carrying this product. This page is for reference only. Chumby is now offering a “…
EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! I…
This is a blank faceplate for the Chameleon 1 enclosure system for development boards Having blanks lets you drill or nip w…
Do you want to be able to measure what current your board is drawing in real time? Maybe it is a board that draws short burst…
This kit includes everything you need to build your very own, fully functional, digital oscilloscope. Once you've got it up a…
180uH inductor. High current rated with a wide operating frequency range. Works well with the MC34063A Buck/boost converter u…
This 12 in extension cable comes in very handy when your servo is further away from the controller than the wire on the servo…
**Replacement:**[SEN-10099](http://www.sparkfun.com/products/10099). The new revision corrects issues with the high pass filt…
**Replacement:** None. There is no direct replacement for this product. This page is for reference only. Header board for th…
These are sealed, addressable 1-meter-long 5V white tri-color LED strips that come packed with 60 SK6812 5050 LEDs. Each of t…
**Replacement:**[SEN-10321](http://www.sparkfun.com/products/10724). We fixed the missing trace on the new version. This page…
These aluminum channels are the building blocks to the [Actobotics](https://www.sparkfun.com/pages/Actobotics) line and funct…
Engineering Just Got Cool with the Arduino Engineering Kit! Bring the power of the Arduino MKR1000 to the classroom with MATL…
This is a very simple board that takes a 4-9V input voltage and outputs a selectable 1.8V or 3.3V regulated voltage. All head…
These hub-mountable aluminum pulleys can be used to drive wheels or other pulleys with ¼” or ⅛” belts. They have an ou…
