Resistor 10K Ohm 1/6th Watt PTH - 20 pack (Sale)

Replacement:COM-11508. We've migrated to new resistors thanks to their thicker and more breadboard-friendly leads. This page is for reference only.

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-downs, and current limiters.

Note: Although these come in bags marked with a quantity of 25, they don't always contain 25. So we'd rather call it 20 and hope that you get extras.

Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • sridenour / about 13 years ago / 1

    Any chance you guys will carry 1/4-watt too?

  • BB / about 13 years ago / 1

    Five cents per resistor? That's pretty steep when you can get 1000 of those for $7 through Mouser (1/4W).

  • R0B0T1CS / about 13 years ago / 1

    Thank, Guys!
    Either it was already in the works or it really did only take you 3 days to add a requested product. Rock on!

    • they were in the works, but we were out of stock of the pre-packaged ones. But it is something we should have carried for quite some time, glad you can put them to some use.

  • Nakor / about 13 years ago / 1

    That's a good idea. I would have picked up a few packs on my last order but you only had the resistor kit at the time. I ended up going on Digikey and ordering a few thousand (3 different values) resistors. It's good to know if I'm running short and already making an order with SFE that I can just toss them in my order.

    • M-Short / about 13 years ago / 1

      If you ordered a few thousand I'm guessing you won't be running short anytime soon.

      • Nakor / about 13 years ago / 1

        Well I ordered a few thousand because I'm lazy and hate reusing old bent-like-crazy resistors. I go through them more quickly than you might think :)

Customer Reviews

No reviews yet.