Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
Three (3) pieces of 3x5" HDPE plastic, 1.5" thick
The MicroMod DIY Carrier Kit includes five M.2 connectors, screws, and standoffs so that you can get all the parts you may ne…
This is a two pack of 60 degree V-Bit mills from Carbide 3D that are perfect for engraving intricate patterns and fine detail…
This is a three pack of 0.125in diameter flat mills from Carbide 3D that are perfect for roughing or machining flat or prisma…
Bare Conductive's Electric Paint Pen is just like any other water-based paint... except that it's electrically conductive!
This is a three pack of ball mills from Carbide 3D that are perfect for fabricating complex, organic surfaces.
The Shapeoko Maintenance Kit includes everything you might need to repair your Shapeoko v3, Shapeoko XL, or Shapeoko XXL.
By mounting these 8"x8" wasteboards to your CNC you won't have to worry about cutting through a piece of flat stock and ruini…
The SparkFun Qwiic PIR Starter Kit (1µA) comes with just the basics of what you need to get started working with passive inf…
The HMC6343 is a fully integrated high end electronic compass module that can compute and give you a heading direction that 
The Nomad Flip Jig is a handy accessory for your Nomad 883 Pro that allows you to cut both sides of a part while maintaining …
If you're looking for a fully-featured Raspberry Pi 4 case, then look no further than the Argon ONE Pi 4 Raspberry Pi Case.
This is a three pack of 0.125in diameter ball mills from Carbide 3D that are perfect for roughing or machining flat or prisma…
Precut sheets of 4x5" acrylic. This material is 3mm thick, or .118".
The fourth edition of our popular SIK, fully reworked from the ground up for a better learning experience! V4.1 now has the a…
This 10 pack of 4x6in double sided copper clad material is ideal for rapid prototyping of PCBs on a CNC machine.
Richlite is an incredibly durable, extremely versatile, and highly sustainable material made from resin-infused paper.
These flat mills are perfect for roughing or machining flat or prismatic parts.
Synthetic wood is great for testing programs, learning how to use the machine, pattern or model making.
If you need more ways to hold material in your Nomad, this Threaded Table provides you with plenty of connection points.
The RED-V Thing Plus from SparkFun is a low-cost, Arduino-compatible development board featuring the Freedom E310 which bring…
This is the Nomad 3, a highly capable and durable CNC machine in a small, grey HDPE encased package.
Arduino AKX00015 CTC Go Kit is an educational program with several modules that can be combined to teach different STEAM subj…
This Low Profile Vice provides you with a compact workholding accessory for the Nomad 883 Pro.
The SparkFun GNSS Chip Antenna Evaluation Board makes it easy to test out various sized GPS antennas and geometries.
These 'V' bits are perfect for engraving intricate patterns and fine details.
The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it…
BitRunner allows Carbide Motion to control power to your router without the need for you to reach for the power switch each t…
The SparkFun Variable Load is a quick to assemble kit that has been designed to allow users to draw a specific amount of curr…
SparkFun Jetson Nano Intermediate Kit with Battery Pack provides you with all of the essential parts needed to start new proj…
These inserts are great for easy and flexible work holding solutions.
Precut sheets of 4x5" delrin. This material is 1/8" thick (3mm thick).
This is V5 of our Heavy-Duty Z, or HDZ, an upgraded Z/X axis for your Shapeoko 4 or Shapeoko Pro.
This is a stereo amplifier kit designed to make use of the [STA540](http://www.sparkfun.com/commerce/product_info.php?product…
The Compute Module 4 packs all the best features of the Raspberry Pi Model B 4 into a more favorable form-factor for embedded…
The Super Hold is a work-holding solution that provides an easy way to secure thin pieces of stock without the use of clamps.
The Phillips #00 screw is the most commonly used fastener in the internals of consumer electronics, game consoles, laptops, P…
The SparkFun Qwiic PIR Starter Kit (170µA) comes with just the basics of what you need to get started working with passive i…
If you'd like to use a larger tool in your Nomad, this collet and nut will let you use tools with a .25" shank.
The EasyVR 3 Plus Shield is a voice recognition shield for Arduino boards integrating an EasyVR module.
The BitZero V2 is a small accessory piece for your Shapeoko CNC machine meant to assist in finding the edges, or datums of th…
This flat mill from Carbide 3D is perfect for roughing or machining flat or prismatic parts.
Utilize this kit to turn your Jetson Nano into a mobile machine with things like object following, collision avoidance via th…