Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it…
Face it, if you keep this up your workbench is going to turn into a galaxy of small parts with no place for anything and noth…
This is your basic tube of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 15 grams (around 5ft). Easy …
This metal enclosure finished in SparkFun Red will help protect your electronics from harmful contact from outside sources.
The Binho Nova Multi-Protocol USB Host Adapter allows one to interface their computer directly to hardware circuits.
For those who'd rather fix it themselves, the iFixit Essential Electronics Toolkit is everything you need to for basic repair…
This is a very simple fixed temp, quick heating, 30W 110/120 VAC soldering iron. We really enjoy using the more expensive iro…
This analog panel meter measures DC voltage from 0-5 volts with 2.5% accuracy. It has a clear and easy to read scale and an a…
A staple for the electrical engineer. I can't tell you how many times I've been one clip short! **Note:** Sold as a single…
This is a replacement soldering tip for the Weller WE1010 soldering station. Each conical-type tip measures 0.02" (0.6mm) wid…
This is a 4x4" diameter, 0.2mm thickness piece of thermal tape.
The Argon POLY+ Raspberry Pi 4 Case uses a three piece snap-fit plastic design to protect your Pi 4 in a cost-effective way.
The Solder-Mateâ„¢ Solder Dispenser provides you with an easy way to, well...dispense solder! This handy tool provides a cont…
This beefy heatsink is designed to dissipate a lot of heat! The 6400BG heatsink fits TO-220, TO-218, TO-247, and Multiwatt pa…
Use this high-strength acrylic gasket to attach the 1.2W panels from Voltaic Systems to an enclosure.
When you're working with e-textiles, you have a tendency to collect a lot of small parts: LilyPad boards, bobbins, needles, t…
This is a basic baseplate for the Raspberry Pi 3 B+. The baseplate is designed for the RPi to remain on the attached via fric…
This is a replacement soldering tip for our [30W Soldering Iron](http://www.sparkfun.com/commerce/product_info.php?products_i…
This is a replacement soldering tip for the Weller WE1010 soldering station. It is a "screwdriver" type of soldering tip, mea…
When you're working with e-textiles, you have a tendency to collect a lot of small parts: LilyPad boards, bobbins, needles...…
Use this high-strength acrylic gasket to attach the 0.3W panels from Voltaic Systems to an enclosure.
The Xcelite 8-in-1 Screwdriver Set provides eight high-quality bits in a single ergonomic tool. Each bit is easily accessible…
Precut sheets of 4x5" acrylic. This material is 3mm thick, or .118".
These inserts are great for easy and flexible work holding solutions.
The Shapeoko 4 XXL is a 3-axis CNC Machine kit that allows you to create your 2D and 3D designs out of non-ferrous metals, ha…
For everyone that's putting a lot of hours on their Carbide Compact Routers - you know who you are - this is for you.
This 10 pack of 4x6in single sided copper clad material is ideal for rapid prototyping of PCBs on a CNC machine.
Precut sheets of 4x5" acrylic. This material is 6mm thick, or .236".
The Shapeoko 4 Standard is a 3-axis CNC Machine kit that allows you to create your 2D and 3D designs out of non-ferrous metal…
The Z-Plus kit includes everything you need to upgrade your existing X/Z-carriage to the Z-Plus (X/Z+).
**Note:** This camera case does not currently fit the [Raspberry Pi Camera Module V2](https://www.sparkfun.com/products/14028…
The Gator Tooth Clamp is an ultra low profile clamp, designed to be used in a variety of ways.
The Tiger Claw Clamp is a low profile, high-quality stainless steel clamp that can be used on the Nomad or the Shapeoko.
Precut sheets of 4x6" delrin. This material is 1/4" thick (6mm thick).
This 10 pack of 2x3in double sided copper clad material is ideal for rapid prototyping of PCBs on a CNC machine.
The Lock Stop is a low profile, high-quality stainless steel stop that can be used on the Nomad or the Shapeoko.
BitSetter measures the length of the cutter in your spindle and, combined with Carbide Motion, automatically resets your Z-ax…
The Carbide 3D Proximity Switch Kit is a complete plug and play solution that replaces the mechanical switches on your Shapeo…
This 10 pack of 2x3in single sided copper clad material is ideal for rapid prototyping of PCBs on a CNC machine.
A simple and effective CNC dust shoe.
Shapeoko Pro is the big brother to the Shapeoko 4, upgraded with linear rails so you can push the Shapeoko Pro harder for a b…
These new eccentric nuts are a revision of the standard eccentric nuts that have been a part of the Shapeoko 3 from the start…