There’s a lot of Raspberry Pi information going around lately. Whether it’s Pi 3, Zero, Zero W or one of the many previous iterations, any forum will have thousands of people giving all the answers possible to a problem. Though most methods work for any version, it can be tough to decide which information to choose. The Raspberry Pi 3 B+ Starter Kit is a great way to gain a solid introduction to the small, credit-card-sized computer. With this kit you will be able to get your Raspberry Pi 3 B+ connected through our SparkFun Pi Wedge to a breadboard and, by utilizing the RPi’s 40-pin GPIO, will be able to control pushbuttons, LEDs and a host of user-created circuits.
The online guides and tutorials we will be providing for the kit and the full release of the RPi 3 B+ will contain step-by-step instructions for how to set up your Raspberry Pi and how to program it in a variety of languages.
This kit will not require any soldering and is recommended for anyone with a drive to learn more about the Raspberry Pi and its programming. So if you are looking for a new challenge or a way to get in on the RPi craze, check out the Raspberry Pi 3 B+ Starter Kit!
This section is subject to change before the kit’s full release.
As of March 16th 2018, the RetroPie SD image hasn’t been updated for the new Raspbian distribution that was released for the Raspberry Pi 3B+. You will need to manually install RetroPie on a fresh/new Rasobian Stretch distribution. You will not be able to use the provided RetroPie SD image (from their download page). If you want to swap the SD card from your (previous generation) Raspberry Pi directly into the new Raspberry Pi 3B+, you will need to upgrade it first, but I have yet to get that working.
sudo apt update sudo apt upgrade
If a board needs code or communicates somehow, you're going to need to know how to program or interface with it. The programming skill is all about communication and code.
Skill Level: Competent - The toolchain for programming is a bit more complex and will examples may not be explicitly provided for you. You will be required to have a fundamental knowledge of programming and be required to provide your own code. You may need to modify existing libraries or code to work with your specific hardware. Sensor and hardware interfaces will be SPI or I2C.
See all skill levels
If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.
Skill Level: Rookie - You may be required to know a bit more about the component, such as orientation, or how to hook it up, in addition to power requirements. You will need to understand polarized components.
See all skill levels
Based on 1 ratings:
An excellent kit put together by SparkFun. Everything you need to get started interfacing the Pi to the outside world.