Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

Arduino Classroom Pack Starter Kit

Added to your shopping cart

The Arduino Starter Kit Classroom Pack is a bundled solution, containing six of the popular Arduino Starter Kits.

This Classroom 6-Pack is for a classroom of at least twelve students — the recommended ratio is two students per kit — and intended for use starting from middle school teachers onwards, looking for an extensive educational solution for learning how to use the Arduino platform.

Each kit contains an Arduino Uno Rev 3 board, a collection of sensors and actuators, and — most important — a guide book which will help students and teachers to take their first steps into the world of electronics, with interactive and sensing objects.

A 30-day trial access to the Chromebook Education app is also included.

Each Arduino Starter Kit contains a full color 170-page book with instructions for fifteen projects:

  1. GET TO KNOW YOUR TOOLS: An introduction to the basics.
  2. SPACESHIP INTERFACE: Design a control panel for a starship.
  3. LOVE-O-METER: Measure how hot-blooded you are.
  4. COLOR MIXING LAMP: Produce any color with a lamp that uses light as an input.
  5. MOOD CUE: Let people know how you're doing.
  6. LIGHT THEREMIN: Create a musical instrument you play by waving your hands.
  7. KEYBOARD INSTRUMENT: Play music with this keyboard.
  8. DIGITAL HOURGLASS: A light-up hourglass that can stop you from working too much.
  9. MOTORIZED PINWHEEL: A colored wheel that will make your head spin.
  10. ZOETROPE: Create a mechanical animation you can play--and in reverse.
  11. CRYSTAL BALL: A mystical tour to answer all your tough questions.
  12. KNOCK LOCK: Unlock a door with a secret knock.
  13. TOUCHY-FEELY LAMP: A lamp that responds to your touch.
  14. TWEAK THE ARDUINO LOGO: Control your personal computer from your Arduino.
  15. HACKING BUTTONS: Create a master control for all of your devices!
  • Project book (170 pages)
  • Arduino UNO
  • USB cable
  • Breadboard 400 point
  • 70 solid core jumper wires
  • Easy-to-assemble wooden base
  • 9V battery snap
  • Stranded jumper wires (black and red each)
  • 6 phototransistor
  • 3 10kΩ potentiometer
  • 10 pushbuttons
  • Temperature sensor (TMP36)
  • Tilt sensor
  • Alphanumeric LCD (16×2 characters)
  • LED (1 bright white, 1 RGB, 8 red, 8 green, 8 yellow, and 3 blue each)
  • 6V/9V small DC motor
  • Small servo motor
  • Piezo capsule (PKM17EPP-4001-B0)
  • H-bridge motor driver (L293D)
  • Optocouplers (4N35)
  • 2 MOSFET transistors (IRF520)
  • 5 100μF capacitors
  • 5 diodes (1N4007)
  • 3 transparent gels (red, blue, and green)
  • Male pins strip (40×1)
  • Resistors:
    • 20 of 220Ω
    • 5 of 560Ω
    • 5 of 1kΩ
    • 5 of 4.7kΩ
    • 20 of 10kΩ
    • 5 of 1MΩ
    • 5 of 10MΩ


Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

Customer Reviews

No reviews yet.