USB to TTL Serial Cable (5V VCC)

This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its separated pins, this cable is a perfect candidate for powering, connecting, and accessing the login and debug console on an older-version Raspberry Pi.

The FTDI cable is designed around an FT232, which is housed in a USB-A connector. The other side of the cable is terminated with a separated 4-pin connector with the following pinout: RX (Yellow), TX (Orange), VCC (5V) (Red), and GND (Black). A link to the FTDI drivers can be found in the Documents section above.

Note: Please be aware that while the I/O pins in this cable operate at 3.3V, the VCC pin is 5V. The VCC pin is NOT 3.3V like the I/O pins.


Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Radu / about a year ago / 1

    I just installed windows 10 and when connecting this cable I get: PL2303HXA PHASED OUT SINCE 2012. PLEASE CONTACT YOUR SUPPLIER It works ok on windows 7

  • Member #684910 / about 3 years ago / 1

    Got any more technical details for this product? Pin out? Logic levels? Is it isolated?

Customer Reviews

No reviews yet.