Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
The WiFi Shield gives your OpenMV Cam the ability to connect to the Internet wirelessly and is perfect for streaming video fr…
added to your cart!
A 433MHz antenna that utilizes an SMA connector and is 200mm long with a gain of 2dBi.
This high-gain duck antenna is designed for LTE devices that operate in the 690-960MHz and 1710-2690 MHz bands. Combined w…
These wireless receivers work with our 315MHz transmitters. They can easily fit into a breadboard and work well with microcon…
With Single-Board Computers (SBCs) on the rise, it is a good idea to have an easy way to interface with them. Operating on a …
The SparkFun Notecarrier Cellular Function Board adds a cellular modem to the MicroMod ecosystem using the Notecard - NOTE-NB…
The Edimax 2-in-1 Wi-Fi 4 & Bluetooth® 4.2 Adapter is a nano-sized USB Wi-Fi adapter that supports Wi-Fi up to 150Mbps.
This is a 1 foot long JST SH communication cable which can be cut and hacked to your needs. Ideal if you have a UAV project w…
PCB edge mount - SMA RF connector. Perfect for prototyping with the GPS and Cellular devices that require an antenna connecti…
The SparkFun AzureWave Thing Plus is a Feather form-factor development board equipped with the AW-CU488.
The Espressif ESP32-C3 is the next version of the popular ESP32 Bluetooth and WiFi enabled module.
The SparkFun MicroMod ESP32 Function Board adds additional wireless options to MicroMod Processor Boards that do not have tha…
This Kit includes the SparkFun Artemis DK board as well as the accessories (Himax camera & USB-C cable) needed to get started…
These wireless transmitters work with our 315MHz receivers. They can easily fit into a breadboard and work well with microcon…
This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless bo…
WizFi360-EVB-Pico is based on Raspberry Pi RP2040 and adds WiFi connectivity using WizFi360.
Tynker and BBC Learning take coding to the next level with a programmable HiFive mini-computer and guided lessons covering Bl…
SMA to MMCX Connector. Adapts MMCX jack to a standard SMA bulkhead. This cable interfaces to the GM862 Cellular modules and t…
The Steedan delivers powerful MIMO antenna technology 5G/4G and Wi-Fi 6 2.4/5.8/7.125GHz and a GPS/GLONASS/BeiDou patch anten…
The ESP32 WROOM MCU Module with PCB Antenna is a powerful, generic WiFi+BT+BLE MCU module that targets a wide variety of appl…
Designed for transmit and receive at 401MHz, this quarter-wave antenna is the perfect partner for our ARGOS ARTIC R2 satellit…
This is an XBee Pro package with a PCB Antenna. You also get a built in microcontroller so it can be programmed using MicroPy…
If you need maximum distance for your LoRa project you need this incredibly durable, outdoor antenna with 5.8dBi gain.
The AA.200 antenna is an active multiband GNSS magnetic mount antenna that exhibits excellent gain and good radiation pattern…
The BeaglePlay by BeagleBoard is a Single Board Computer is designed to simplify the complexities of embedded system developm…
Designed for 810-910 MHz (868MHz center frequency) this antenna is ideal for distant LoRa nodes.
PCB edge mount Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. This is a standard edge connect…
This is an inner thread (outer nut) adapter that will connect to any of our wireless boards or interface cables and allow you…
It's best to think of the ESP32-S2 WROOM Module as the next step in the ESP32 WROOM module line.
The BGM220 Explorer Kit is an ultra-low cost, small form factor development and evaluation platform for the BGM220P Wireless …
The Particle Xenon is a low-cost mesh-enabled development kit.
The RN-52 module from Roving Network is an audio module that provides a highly integrated solution for delivering high qualit…
The ESP32 WROOM MCU Module with U.FL is a powerful, generic WiFi+BT+BLE MCU module that targets a wide variety of application…
Looking for a low-cost way to send and receive data messages via satellite? This is it! With a clear view of the sky, the Swa…
The ESP32-WROOM-DA module achieves high-quality, wireless connectivity across large areas, using two complementary PCB antenn…
The Portenta C33 is a powerful System-on-Module based on the Renesas RA6M5 microcontroller group, which utilizes the high-per…
A small 1/4 wave rubber duck antenna for (European band) LoRa or other 868MHz communication.
2.4GHz ceramic chip antennas. Very small antennas that work nicely with the Nordic ICs. Don't expect these little guys to per…
Itty-bitty U.FL SMD connector. Great for tight PCB layouts that require antenna connections.
Our RedBoards are great. But don't they sometimes seem a little **_BIG_**?! Enter **smôl**, a new range of boards which a…
Introducing the Neutis Development Kit from Emlid! This Quad Core System on a Module in a dev kit is perfect for makers and d…
The Pixhawk® 6C is perfect for developers at corporate research labs, startups, academics (research, professors, students), …
The SparkFun GNSS Chip Antenna Evaluation Board makes it easy to test out various sized GPS antennas and geometries.
Introducing the Neutis N5 Module from Emlid! This Quad Core System on a Module is perfect for makers and developers!
This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long and has a 50Ω impedance…
This is an XBee Pro module with an RP-SMA connector. You also get a built in microcontroller so it can be programmed using Mi…