For this project I used the lunchbox found here.
Use Lead-free solder and clean the flux off of the board before securing in the lunchbox.
These four wishlist items are optional and recommended if you do not have them on hand.
PRT-08831 Green Heat Shrink Tubing
PRT-10218 9V Alkaline Battery
PRT-11367 Hookup Wire Assortment - Solid Core
DEV-09716 - FTDI Basic Breakout - 5V
This build substitutes a blue LED bargraph in favor of the Yellow one for a more temperature-based color scheme.
Product | Subtotal | Qty | |
---|---|---|---|
SparkFun Bar Graph Breakout Kit
DEV-10936 |
19.95 |
1
Cannot be ordered at this time. |
|
Arduino Pro Mini 328 - 5V/16MHz
DEV-11113 |
10.95 | 1 | |
Temperature Sensor - TMP36
SEN-10988 |
1.6 | 1 | |
ProtoBoard - Square 1" Double Sided
PRT-08814 |
2.5 |
1
Cannot be ordered at this time. |
|
Screw - Phillips Head (1/2", 4-40, 10 pack)
PRT-10452 |
1.6 | 1 | |
Hook-Up Wire - Assortment (Solid Core, 22 AWG)
PRT-11367 |
21.5 | 1 | |
Nut - Metal (4-40)
PRT-10232 |
0.6 |
4
Cannot be ordered at this time. |
|
Break Away Headers - Straight
PRT-00116 |
1.75 | 1 | |
9V Snap Connector
PRT-00091 |
1.75 | 1 | |
9V Alkaline Battery
PRT-10218 |
2.25 | 1 | |
Heat Shrink - Green 5' x 1/4"
PRT-08831 |
1.95 |
1
Cannot be ordered at this time. |
|
10 Segment LED Bar Graph - Blue
COM-09937 |
2.25 | 1 | |
SparkFun FTDI Basic Breakout - 5V
DEV-09716 |
16.5 | 1 | |
Total: 85.15 |