by Rowland
This list has the necessary parts needed for the QuickBot that can be ordered from SparkFun.
With the exception of the encoder board because it has not been released yet.
The QuickBot will also need:
Wifi module - the best one I have found is provided by Logic Supply.
5V Regulator - Don't use standard 7805 regulator. I have found it can not provided sufficient current. Use this one from Mouser Electronics.
Capacitors (1 100uF, 1 10uF, 1 0.1uf), Diode, Resistors (7 10K), 7 20K) - not included in this list because they are significantly cheaper at Mouser Electronics.
Jumper Wires M/M (~30 needed)- not included in this list because they are a better deal on Amazon and come in a bundle of different lengths. But SparkFun does provide M/M jumper wires as well.