Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Mon-Fri, 9am to 12pm and 1pm to 5pm U.S. Mountain Time:
(303) 284-0979
Chat With Us
Jump to Subcategory:
added to your cart!
A small 1/4 wave rubber duck antenna for LoRa or other 860-960MHz communication. Antenna has a center frequency of 915MHz and…
These wireless transmitters work with our 434MHz receivers. They can easily fit into a breadboard and work well with microcon…
A flexible, paper-thin GNSS Antenna with a U.FL connector and an adhesive backing.
This universal Antenna Kit can also be used with LoPy, SiPy, LoPy4, and FiPy IoT development boards to talk over LoRa and Sig…
These wireless receivers work with our 434MHz transmitters. They can easily fit into a breadboard and work well with microcon…
The Electron is a tiny development kit for creating 3G cellular-connected electronics projects and products. It comes with a …
The LS20031 GPS receiver is a complete GPS smart antenna receiver, that includes an embedded antenna and GPS receiver circuit…
The Pixhawk Radio Telemetry Kit is a lightweight and inexpensive open source radio platform that can allow for ranges of 300m…
Qwiic RF is a packet radio system that's designed for sending short packets of sensor data from one Qwiic bus to another. Mes…
This ANT700 is a telescopic antenna designed for operation from 300 MHz to 1.1 GHz with a total length that is configurable f…
This is an XBee Pro package with a PCB Antenna. You also get a built in microcontroller so it can be programmed using MicroPy…
This is a two-pack of omni-directional antennas that have been assembled to be specifically used with the LimeSDR Mini.
This is a full 8-pin breakout for the SIM socket allowing direct access to SIM communication. **Note:** This breakout boar…
SMA to MMCX Connector. Adapts MMCX jack to a standard SMA bulkhead. This cable interfaces to the GM862 Cellular modules and t…
This starter kit has everything you need to get started with the ESP8266 Thing Dev board. Solder on some headers (iron not i…
The 1Sheeld+ is an IoT shield for Arduino with a built-in BLE module that gives your Arduino the capability to connect to you…
This is a four-pack of omni-directional antennas and cables that have been assembled to be specifically used with the LimeSDR…
The SparkFun Inventor's Kit for Photon is a great way to get started in the fresh IoT world and WiFi development. The SparkFu…
This connector cable interfaces N type female to RP-SMA male. Primarily used to connect our larger 915MHz LoRa antenna to RP-…
The GPS Mouse is a self contained module perfect for UAV and autonomous vehicle enthusiasts. The The GP-808G inside the Mouse…
With Single-Board Computers (SBCs) on the rise, it is a good idea to have an easy way to interface with them. Operating on a …
The Omega2+ IoT computer is Onion’s top-end Linux-based WiFi development board designed to enable makers of all skill level…
This is the RN-42 module from Roving Networks, a powerful, small, and very easy to use. This Bluetooth module is designed to …
The Tessel 2 is a development board with on-board WiFi capabilities that allows you to build scripts in Node.js. This Tessel …
The RockBLOCK 9603 Accessory Cable is terminated with a simple 10-pin molex-style connector at one end and a bare wire pigtai…
PCB edge mount - SMA RF connector. Perfect for prototyping with the GPS and Cellular devices that require an antenna connecti…
This is the XBee WiFi Module with RP-SMA connector from Digi. XBee WiFi embedded RF modules provide simple serial to IEEE 802…
Increase your range with this 1/2 wave duck antenna. Designed for 860 to 960MHz it is ideal for distant LoRa nodes. Utilizes …
This high gain, 7.75" antenna is perfect for AVL applications where cellular reception is a must. Connector is regular SMA so…
HAMlab is a fully functional SDR transceiver with 160-10m band coverage and 10W of output power built around the STEMlab plat…
The HX1 is a narrow band radio transmitter module for use in long range data transfer applications at ranges up to 10km.
This is an XBee module with a RP-SMA connector. You also get a built in microcontroller so it can be programmed using MicroPy…
The Pycom Expansion Board 3.0 allows you the means to create and connect new IoT projects with your WiPy 2.0, WiPy 3.0, LoPy,…
The Omega2 IoT computer is one of Onion’s Linux-based WiFi development boards designed to enable makers of all skill levels…
This is a more universal GPS breakout board that uses a vertical SMD connector (EM406) which is perfect for the GP-735T GPS r…
The Particle Argon is an IoT development kit that allows you to connect your mesh network to WiFi
Introducing the Neutis Development Kit from Emlid! This Quad Core System on a Module in a dev kit is perfect for makers and d…
This is a similar XBee Pro module with a u.Fl connector. You also get a built in microcontroller so it can be programmed usin…
This is a 1 foot long JST SH communication cable which can be cut and hacked to your needs. Ideal if you have a UAV project w…
This is a 1.75" long JST SH communication cable which can be cut and hacked to your needs and can even be used as pigtails. T…
Itty-bitty U.FL SMD connector. Great for tight PCB layouts that require antenna connections.
The SparkFun Mini GPS Shield equips your Arduino Mini with access to a GPS module, µSD memory card socket and all of the oth…
This module from Roving Networks is powerful, small, and very easy to use. This Bluetooth module is designed to replace seria…
The AST-CAN485 WiFi Shield provides a way for working wirelessly in automation, an environment famous for being noisy and unf…
This is a handy little Bluetooth USB mini-adapter. This adapter supports Bluetooth v2.0 class 1 and has a maximum distance of…
This is the Ameba Board from Realtek, an IoT solution inside the familiar Arduino form factor. The Ameba Board supports WiFi,…
Particle's IoT (Internet of Things) hardware development board, the Photon, provides everything you need to build a connected…
Forgot your password? No account? Register one!
