Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
DataLogger IoT
with onboard 9DoF
This ESP32-based data logger automatically record inputs from a large selection of Qwiic sensors without writing a single line of code.
Jump to Subcategory:
added to your cart!
The Tiny Code Reader from Useful Sensors is smaller than a quarter, very low cost, and connects through Qwiic.
This is the 6mm CS-mount wide angle lens from CGL Electronics Co. Ltd. for use with the Raspberry Pi HQ Camera Module.
This simple device operates at 940nm and works well for generic IR systems.
The SparkFun MicroMod mikroBUS™ Starter Kit is designed to give you just what you need to start using the MicroMod and Clic…
This basic piezo sensor from Measurement Specialties is often used for flex, touch, vibration and shock measurements. A small…
The SparkFun Air Velocity Sensor Qwiic Kit comes with everything you need to get started using the FS3000-1015 Air Velocity S…
The US1881 is an integrated Hall-Effect latched sensor.
The FLIR Lepton Thermal Camera Breakout Board is an easy-to-interface evaluation board to quickly connect the Lepton camera m…
The OAK-D-IoT-40 is an Embedded/IoT version of the OAK-D imaginf platform from Luxonis.
With the Gas Sensor Breakout you will be able to utilize each oversized, oddly spaced pins featured on every MQ gas sensor pr…
This is a basic RFID tag that functions within the MIFARE Classic® 1K guidelines. You can use these for all sorts of identif…
The SparkFun ADXL313 Breakout is a low power, high resolution (up to 13-bits) 3-axis accelerometer for measurement up to ±4g…
Small electret microphone. Useful in acoustic and audio applications.
This IR proximity contactless button makes for a good replacement for typical push buttons
A line follower sensor gives your robot the ability to detect lines or nearby objects.
This is a small device called a [reed switch](http://en.wikipedia.org/wiki/Reed_switch). When the device is exposed to a magn…
The LIS3DH Breakout is a smart, low-power, three-axis, capacitive micro-machined accelerometer.
The STMicroelectronics ST25DV _**dynamic**_ Near Frequency Communication / Radio Frequency Identification tag ICs are awesome…
Experience sharp, smooth video calling (720p/30FPS) in a widescreen format with the C270 HD Webcam.
The Build HAT allows you to control LEGO® Technic™ devices with your favorite Raspberry Pi.
The SparkFun Notecarrier Cellular Function Board adds a cellular modem to the MicroMod ecosystem using the Notecard - NOTE-NB…
The MQ-9B is a CO and CH₄ gas detection sensor form Winsen. The sensing material of the MQ-9B is SnO2, which has a low cond…
Deploy computer vision at the edge faster than ever, with our ready-to-use, standalone intelligent camera.
Passive Infrared (PIR) sensors are great for detecting motion in a small area around the sensor.
The KR Sense 45A is a small voltage and current sense breakout board.
Powered by Raspberry Pi's RP2040 microcontroller, this board has the power to run all Tensorflow Lite Micro tiny machine lear…
These paper-thin, adhesive EPCglobal Gen2 tags work with our RFID readers and can be stuck to practically anything.
This is a simple breakout board for our RFID readers. The SparkFun RFID Reader Breakout converts the 2mm pins to bread board …
These digital (LH) British Telecom connectors are primarily used by our English friends across the pond but here at SparkFun …
The KR Sense 90A is a small voltage and current sense breakout board.
This cute little coax is a champ in our RF kit! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now inst…
Sharp's GP2Y1010AU0F is an optical air quality sensor, designed to sense dust particles. An infrared emitting diode and a pho…
This sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal.…
An ambient light sensor with peak sensitivity at 570 nm.
The Kitronik Smart Air Quality Board for Pico provides a complete air monitoring and reporting solution for the Raspberry Pi …
The 6-Channel Temperature Monitor can measure temperatures from as low as −240°C up to +850°C (real-world limits greatly …
The SparkFun RP2040 mikroBUS™ Starter Kit is designed to give you just what you need to start using the Click, Qwiic, and R…
The Accelerometer sensor is an add-on for your RedBot that provides bump and motion detection. The sensor works by measuring …
This Thermocouple Connector is perfect for bridging the gap between Type-K thermocouples with standard connectors with a PCB.
Great for detecting motion in a small area and optimized for small movements to offer motion-sensing options for battery powe…
Our RedBoards are great. But don't they sometimes seem a little **_BIG_**?! Enter **smôl**, a new range of boards which a…
The MPL115A1 is a digital barometer that uses MEMs technology to give accurate pressure measurements between 50kPa and 115kPa…
Thanks to the SparkFun gator:soil micro:bit Accessory Board, you can now measure the moisture level in soil without any vocal…
The MMA8452Q is a smart low-power, three-axis, capacitive MEMS accelerometer with 12 bits of resolution. This accelerometer i…
The Nicla Sense ME is a tiny, low-power tool that sets a new standard for intelligent sensing solutions.