Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
The SparkFun Qwiic Wireless Speaker Kit provides you with everything you need to make a wireless audio speaker.
The SparkFun AzureWave Thing Plus is a Feather form-factor development board equipped with the AW-CU488.
This is a translucent silicon rubber button pad with 16 buttons, the same found in our Simon Soldering Kits.
This is a breakout board for the [L298N](http://www.sparkfun.com/commerce/product_info.php?products_id=9479) full-bridge dual…
The gator:log is the perfect data logging tool for your next experiment.
This is a breakout board for our non-isolated, [6A DC-to-DC Converter Module](http://www.sparkfun.com/commerce/product_info.p…
The SparkFun MicroMod ESP32 Function Board adds additional wireless options to MicroMod Processor Boards that do not have tha…
The Single MicroMod Qwiic Carrier Board can be used to rapidly prototype with other Qwiic devices.
This Kit includes the SparkFun Artemis DK board as well as the accessories (Himax camera & USB-C cable) needed to get started…
This a simple breakout PCB for our [4x4 silicone button pads](https://www.sparkfun.com/products/7835). Each LED and button ca…
The SparkFun MicroMod STM32 Processor Board is ready to rock your MicroMod world with its ARM® Cortex®-M4 32-bit RISC core!
This is a simple breakout board for our RFID readers. The SparkFun RFID Reader Breakout converts the 2mm pins to bread board …
The Qwiic pHAT Extension for the RPi400 provides you with an easy way to access all GPIO, stack your favorite HAT upright or …
The SparkFun Power Supply Sample Kit provides you with a sampling of the power supplies that we offer to power your next proj…
This shield provides an easy way to SparkFun's Qwiic ecosystem with your Teensy 4.0, 3.2, or LC board footprint.
The SparkFun ESLOV to Qwiic Bridge lets you quickly and easily connect Qwiic breakouts to Arduino boards with an ESLOV connec…
Low-cost basic SOIC break out boards. These are custom PCB boards that interface standard SOIC devices to standard .1" header…
The SparkFun Wireless Motor Driver Shield is designed to make connecting motors, sensors and other components to your Arduino…
The full-color LilyPad Sewable Electronics Kit Guidebook contains step-by-step instructions for creating four interactive pro…
Behold, the Hydra! This USB power cable probably looks a lot like something you've hacked together before.
The Accelerometer sensor is an add-on for your RedBot that provides bump and motion detection. The sensor works by measuring …
The SparkFun RP2040 mikroBUSâ„¢ Starter Kit is designed to give you just what you need to start using the Click, Qwiic, and R…
8-Pin SSOP to DIP break out board. The footprint was rotated to accommodate different width SSOP devices and can be used with…
When you're working with e-textiles, you have a tendency to collect a lot of small parts: LilyPad boards, bobbins, needles, t…
Processing is a free, beginner-friendly programming language designed to help non-programmers create interactive art with cod…
This is the Add-On kit for the SparkFun Digital Sandbox (DS) learning platform. With this add-on you will be able to perform …
Thanks to the SparkFun gator:soil micro:bit Accessory Board, you can now measure the moisture level in soil without any vocal…
When you're working with e-textiles, you have a tendency to collect a lot of small parts: LilyPad boards, bobbins, needles...…
A sheet of 75 stickers in common antenna frequency ranges.
The Teensy is an amazing development platform that allows you to get more computing power than an Arduino Uno, and in less sp…
A 5-pack of the M.2 screws that SparkFun uses with the MicroMod ecosystem.
The SparkFun gamer:bit is a fun-filled "carrier" board for the micro:bit that, when combined with the micro:bit, provides you…
Great for detecting motion in a small area and optimized for small movements to offer motion-sensing options for battery powe…
The SparkFun Variable Load is a quick to assemble kit that has been designed to allow users to draw a specific amount of curr…
The SparkFun GNSS Chip Antenna Evaluation Board makes it easy to test out various sized GPS antennas and geometries.
The MicroMod DIY Carrier Kit includes five M.2 connectors, screws, and standoffs so that you can get all the parts you may ne…
The SparkFun gator:microphone is a micro:bit Accessory Board that integrates a microphone into SparkFun's gator:bit series of…
With the SparkFun Cryptographic Development kit you will get everything you need to learn the fundamentals of cryptographic a…
The SparkFun Qwiic MP3 Trigger takes care of all the necessary requirements for playing sound files, all you need to do is se…
The fourth edition of our popular SIK, fully reworked from the ground up for a better learning experience! V4.1 now has the a…
SparkFun Jetson Nano Intermediate Kit with Battery Pack provides you with all of the essential parts needed to start new proj…
The SparkFun Qwiic PIR Starter Kit (1µA) comes with just the basics of what you need to get started working with passive inf…
The SparkFun Qwiic PIR Starter Kit (170µA) comes with just the basics of what you need to get started working with passive i…
The HMC6343 is a fully integrated high end electronic compass module that can compute and give you a heading direction that 
The RED-V Thing Plus from SparkFun is a low-cost, Arduino-compatible development board featuring the Freedom E310 which bring…
This is a breakout board for Honeywell's HIH-4030 humidity sensor. The HIH-4030 measures relative humidity (%RH) and delivers…
Feeling Fancy? The SparkFun Top pHAT is the fundamental machine learning add-on for Raspberry Pi or any 2x20 GPIO SBC!
The Qwiic Transparent OLED HUD is SparkFun's answer to all of your futuristic transparent HUD needs.