Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
This is a simple 2x6 female PTH header. Each pin has a spacing of 0.1" in between each other.
This is a simple 14-pin female PTH header. Each pin has a spacing of 0.1" in between each other.
Sometimes referred to as "spade connectors," these quick disconnects are really useful as power connectors in prototyping or …
Poke Home Connectors have been added on a number of our boards over the last few years by providing a simple terminal-type co…
This 2x13 shrouded header has the same number and spacing of pins as the Raspberry Pi so you can easily connect via ribbon ca…
These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won't work. T…
This is a 40-pin surface mount FPC (Flat Printed Circuit) connector.
These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won't work.
These are simple 12-position screw terminals with 3.5mm pitch pins.
This is a SMD 6 pin right angle female header. We realized that we have had the male version of this header available for awh…
Ever wanted to see what's on that SIM card? Use these sockets in your next project to interface to any old SIM. 6-Pin standar…
This 6 position screw terminal block provides a simple way to connect wires to a single connection point.
Sometimes referred to as "spade connectors," these quick disconnects are really useful as power connectors in prototyping.
These 0.1" spaced female headers are perfect for building your own Raspberry Pi B add-on modules. These PTH headers are arran…
Here is a four pin horizontal 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are …
This is a 3-pin male SMD right angle header.
This sleek, red 16GB thumb drive has been emblazoned with our SparkFun Electronics logo and our moniker to Start Something!
Here is a six pin horizontal 1.0mm pitch connector.
This is a basic surface mount JST-SH 2-pin right angle connector.
