Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
These are small spring terminals. Open the aperature with the small arm, insert the wire, release the arm and the wire is hel…
This kit has all the parts needed to connect to the Ethernet port on Teensy 4.1.
This is the SparkFun RJ11 Breakout, two simple breakout boards for the common 6-pin RJ11 connector. These little boards can e…
Screw Terminal 3.5mm pitch pins with slide-locking together to form any size you need. Rated up to 125V @ 6A, and can accept …
These are two pin jumpers (also called shunts) that will create an electrical connection between two pin headers. Commonly us…
These Clincher connectors from Amphenol FCI can be used to terminate Flat Flexible Cables (FFCs) to an easy-to-use standard h…
This is a black insulated binding post. These binding posts *do* accept banana plugs, and are a great way to connect single-w…
These headers are made to work with the SparkFun ESP32 Thing to connect to ESP32 Shield boards.
This is a 8-pin female header, with extra long legs -- great for stacking Arduino shields. Pins are spaced by 0.1".
Integrate your MicroMod project into an Ethernet network including Power-over-Ethernet with the SparkFun MicroMod Ethernet Fu…
RJ45 connectors are the kind that are used for Ethernet jacks, but they make great general purpose connectors when you need a…
These are simple through-hole RJ45 sockets with PCB mounting posts. These 8-pin connectors are commonly used in conjunction w…
The SparkFun MicroMod Single Pair Ethernet Function Board introduces 10BASE-T1L Two-Wire Ethernet protocol into the SparkFun …
These headers are made to work with the Teensy 4.1, Teensy 3.6, and Teensy 3.5 development boards.
DC power jack/connector. This is a common barrel-type power jack for DC wall supplies. These are compatible with our DC wall …
These analog (RH) British Telecom connectors are primarily used by our English friends across the pond but here at SparkFun w…
This is a 10-pin female header, with extra long legs -- great for stacking R3-compatible Arduino shields! Pins are spaced…
Ethernet is now ubiquitous with embedded systems. Before you can get your set-top box on the internet, you'll need one of the…
This is a red insulated binding post. These binding posts *do* accept banana plugs, and are a great way to connect single-wir…
This is a row of 40 break away headers spaced 0.1" apart with long pins on both sides. This header is especially useful when …
This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device compatible with t…
This is a 6-pin female header, with extra long legs -- great for stacking Arduino shields. Pins are spaced by 0.1".
Through-hole RJ11 socket with PCB mounting posts. 6-pin connection - housing accepts common telephone connectors/wiring. I…
These are simple 2-position screw terminals with 2.54mm pitch pins. Rated up to 150V @ 6A, this terminal can accept 30 to 18A…
This is a simple 3 pin female PTH header. This header is in a configuration that makes it ideal to be used with the [MyoWare …
These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers sold…
Each kit of headers makes your Teensy 4.0, 3.2, and LC breadboard compatible and will allow for stacking a Teensy and Teensy-…
This adaptor allows you to power your RPi 4 with a previous usb-micro B power supply.
This is a super small, 2x5 pin male PTH header. This header is in the common configuration for JTAG applications.
Low profile 3.5mm stereo audio jack.
These are the surface mount 50 pin 0.5mm Board to Board Double Slot Female Connectors found on the Alchitry FPGA boards.
Simple shrouded 10-pin connector. Good for preventing cable connection mishaps. Use for programming, data, power, or any othe…
This is a 10-pin socket with 2mm pitch that mates with the popular XBee radio from Digi. Use this small part to avoid having …
This is a 2x18 pin female header. Each pin has a spacing of 0.1" in-between each other.
The micro:bit Edge Connector - PTH, Right Angle (80-pin) allows you to expand the capabilities of the BBC micro:bit.
This new version now has all 5 pins broken out on the connector. We have no idea what USB device you are hooking up to, but i…
DB9 female header - right angle PCB mount. 0.318" Style.
These stackable headers are made to work with the [SparkFun ESP32 Thing Plus](https://www.sparkfun.com/products/14689) to con…
Latch Terminal 5mm pitch, 2-pin. Rated up to 250V @ 11A and can accept 18-22AWG wire.
This is a 3-pin, through-hole PH series JST connector. The pins are spaced by 2mm. We really like the solid locking feeling…
This is a good quick way to to interface to bare wires.
This is a 10-pin socket with 2mm pitch that mates with the popular XBee radio from Digi. This is the SMD version that we are …