Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
Standard 22 AWG solid Yellow hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes…
When experimenting with GPS or RF it can be very handy to have the antenna on the top of your house or car with a clear view …
A 200mm MIPI Cable for interfacing the Raspberry Pi Camera Modules with the Raspberry Pi 5.
Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing…
This is the 100mm 16-way 0.5mm-pitch Flexible Printed Circuit used to interconnect smôl boards end to end. *** _**smô…
Behold, the Hydra! This USB power cable probably looks a lot like something you've hacked together before. We do it all the t…
The ESLOV connector has five pins (one more than standard I2C) for automatically configuring the module and handli…
A black USB A to Micro B cable for use with the micro:bit.
This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opp…
This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE c…
This is a 4-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors.
Standard 22 AWG solid White hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes …
Standard 22 AWG stranded red wire. Use this for soldering wire or any project in which you need flexible wire. Comes in small…
USB On-The-Go is a really useful USB specification! It allows some small devices that would usually be unable to act as a hos…
Do you fear that your power may not be "far reaching" enough? How would another 3' work for you? Okay, so it doesn't sound ve…
Standard 22 AWG solid Gray hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes i…
This servo cable has a shrouded male servo connector on one end, and 3x breadboard hookup pigtails at the other end.
Standard 22 AWG solid Brown hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes …
These 0.3m cables have minor, yet genius modifications that allow both ends to be plugged into their ports regardless of thei…
This is a 6-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors.
Standard 22 AWG stranded black wire. Use this for soldering wire or any project in which you need flexible wire. Stranded wir…
This is a wire assembly terminated with the same 8-pin JST-SH connector which is on the Mega Pro Mini. Pick up a few of these…
You might have seen these cables used in computers. They are typically used to bring USB connections from a motherboard to th…
This 3ft Category 6 (CAT 6) Ethernet cable is the solution to your internet working needs. With a speed of up to 500MHz you c…
A 200mm MIPI Cable for interfacing the Raspberry Pi Display Modules with the Raspberry Pi 5.
This 0.5m SPE cable enables Ethernet data transmissions by using only two wires and the simultaneous power supply for termina…
USB-A to USB-C with real-time display charging power, all in a 4ft cable!
A green USB A to Micro B cable for use with the micro:bit.
Great for general connections between projects (low or high current applications).
Standard 22 AWG stranded white wire. Use this for soldering wire or any project in which you need flexible wire. Stranded wir…
This is the 36mm 16-way 0.5mm-pitch Flexible Printed Circuit used to interconnect smôl boards side by side. This FPC has an …
This is a simple three wire cable. Each cable is 6" long and is great for jumping from board to board or just about anything …
This is an Audio to Alligator Cable, an 8" long 22 AWG wire with two alligator clips at one end and a 2.5mm mono plug at the …
These are 6" long jumper wires with male connectors on both ends. Use these to jumper from any female header on any board, to…
These simple 24AWG wires are terminated with a female insulated spade connector at one end and a braided wire lead at the oth…
These red and black jumper wires can be used for pretty much everything including breadboards, Arduinos, and any 0.1in pitch …
This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin Molex co…
This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins.
The is the official, 1m, HDMI to HDMI Cable for use with the Raspberry Pi.
This is a handy cable for connecting a five pin GHR-05V type locking connector to breadboard friendly male pins.
Behold, the Hydra! This USB power cable probably looks a lot like something you've hacked together before.
These Adam Tech Wall Adapter Cables are terminated with a standard European (CEE 7/7) plug at one end and three insulated spa…
This is a USB 3.0 type A to Micro-B 9-pin cable.
The cable features a 1.25mm pitch GHR-06V-S & GHR-04V-S 'locking' JST connector commonly found on some sensors, radios, and o…
A simple 10-pin cable.