We are still shipping! However, order processing may take longer than usual and we cannot guarantee same day shipments due to staffing guidelines from the CDC. Please see all COVID-19 updates here. Thank you for your continued support.
Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Mon-Fri, 9am to 12pm and 1pm to 5pm U.S. Mountain Time:
(303) 284-0979
Chat With Us
Jump to Subcategory:
added to your cart!
The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built…
The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 20x4 …
The SparkFun Qwiic Micro OLED Breakout is a Qwiic enabled version of our popular MicroView and micro OLED display!
This is a basic 16 character by 2 line display. Black text on Green background. Utilizes the extremely common HD44780 paralle…
This 7" Raspberry Pi Touchscreen LCD provides you with the ability to create a standalone device that can be utilized as a cu…
The SparkFun Qwiic Transparent Graphical OLED Breakout allows you to display custom images on a transparent screen using eith…
The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 …
The Nokia 5110 is a basic graphic LCD screen for lots of applications. It was originally intended to be used as a cell phone …
This is the latest evolution of our serial LCD. Included on a single board is a 16x2 LCD and an embedded circuit based around…
The Qwiic Transparent OLED HUD is SparkFun's answer to all of your futuristic transparent HUD needs.
This is a basic 16 character by 2 line display with a snazzy black background with white characters. Utilizes the extremely c…
The SparkFun Micro OLED Breakout Board breaks out a small monochrome, blue-on-black OLED. It’s "micro", but it still packs …
This OLED Display from Zio can display up to 3 lines of text, is thinner & consumes less power than an LCD, & uses fast refre…
Here is the Zio Qwiic 1.5inch 128 x 128 pixels OLED display module.
The SparkFun Flexible Grayscale OLED Breakout is a small grayscale OLED that can be bent up to a 40mm radius without any worr…
This is a 16 character by 2 line display that runs at 3.3V. Utilizes the common ST7066/HD44780 parallel interface ([datasheet…
This is a framed graphical LCD 64x128 with LED backlight. This unit is a very clear STN type LCD with a simple command interf…
This LCD Touchscreen HAT fits on top of the Raspberry Pi, practically form fitting on top of it so as not to compromise the o…
A 128x160 color (18 bit!) TFT LCD display. Use this breakout to easily add visual display/interface capabilities to a project…
The SparkFun TeensyView brings you an easy way to add a small, white-on-black OLED to your Teensy development board. The 128x…
This is similar to other 16x2 character LCDs that you've seen before but with one vibrant difference: The backlight is actual…
The LCD Shield gives your OpenMV Camera the ability to display what it sees on-the-go while not connected to your computer.
This is the serial backpack for graphic LCDs. The SparkFun Graphic LCD Serial Backpack interfaces to either our [160x128 pixe…
The microUSB Programming Adapter (μUSB-PA5-II) is a USB to Serial-TTL UART bridge converter which is very small and easy to …
The µOLED-128-G2 is a compact display module from 4D Systems using the latest state of the art Passive Matrix OLED (PMOLED) …
The PaPiRus is a HAT for the RPi that is capable of driving an ePaper display with ease by making use of the existing open so…
This display module from 4D systems is the uLCD-70DT, a 7.0” intelligent touchscreen LCD powered by the DIABLO16 graphics p…
The 4.3” resistive touch LCD from 4D Systems is a cape specifically designed for the BeagleBone Black, and provides a 4.3…
The SparkFun Photon Micro OLED Shield breaks out a small monochrome, blue-on-black OLED to use with your Photon module. It’…
The µLCD-144-G2(GFX) is a compact and cost effective display module using the latest state of the art LCD (TFT) technology w…
The uOLED-96-G2(GFX) is a compact and cost effective display module using the latest state of the art Passive Matrix OLED (PM…
The PaPiRus Zero is an ePaper / eInk screen HAT designed for the Raspberry Pi Zero and the Raspberry Pi Zero W.
Here's a very cool [TFT LCD](https://electronics.howstuffworks.com/lcd4.htm) display with 128 x 160 resolution and 18-bit col…
This accessory for the Love to Code Chibitronics line is an OLED that has been designed to help you understand what’s going…
4D Systems BeagleBone Black Display Cape with Resistive Touch (800 x 480, 7")
A powerful, Wi-Fi enabled ESP32 microcontroller makes this six-inch e-paper display – recycled from a Kindle e-reader – i…
Newhaven Display's 5.0" EVE2 TFT module powered by the FTDI/Bridgetek embedded graphic engine with capacitive touch integrati…
Newhaven Display's 4.3" EVE2 TFT module powered by the FTDI/Bridgetek embedded graphic engine with capacitive touch integrati…
The gen4-4DPi range are Primary Display’s for the Raspberry Pi A+, B+, Pi2, Pi3, Pi3 B+, Pi Zero and Pi Zero W.
This is a 9.0" colour active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor).
This is a 7.0" colour active matrix LCD module incorporating amorphous silicon TDT (Thin Film Transistor).
Newhaven Display's 3.5" EVE2 TFT module powered by the FTDI/Bridgetek embedded graphic engine with capacitive touch integrati…
This is a 5.0" colour active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor).
A high-resolution, high-speed 4.0" TFT display for your Raspberry Pi with capacitive multi-touch!
