Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
added to your cart!
This 64GB MicroSD card from Raspberry Pi is the preferred choice for those looking to run and boot an OS off of a MicroSD car…
This 32GB MicroSD card from Raspberry Pi is the preferred choice for those looking to run and boot an OS off of a MicroSD car…
The Raspberry Pi Bumper is a snap-on silicone bumper that protects the bottom and edges of a Raspberry Pi 5, while allowing e…
Sony IMX500 Intelligent Vision Sensor based camera that supports on-board processing for a variety of popular neural network …
A small 30mm x 30mm soldering hot plate.
A small 50mm x 50mm soldering hot plate.
W55RP20-EVB-Pico is an evaluation board for W55RP20, a chip that combines W5500, a wired TCP/IP controller, and RP2040.
The Soft Power Switch Mk2 is a passive, hard on/off switch with software feedback and control. In other words, it's like the …
The SparkFun Indoor Air Quality Sensor - SCD41 SEN55 (Qwiic) combines two excellent indoor air quality sensors in the SCD41 a…
Slim, extremely light weight batteries based on Lithium Ion chemistry. With output at a nominal 3.7V at 1500 mAh and is IEC62…
This custom-designed OBD2 cable from Macchina functions as both a splitter and at about one meter (~39 inches) in length, as …
This is a 5mm right angle light pipe to get the light of an LED out the end plate of an enclosure. We couldn't find a light p…
The next iteration of the Raspberry Pi single board computer featuring a 64-bit quad-core Arm Cortex-A76 processor running at…
The SparkFun telescoping pole is perfect for GNSS projects that require mobility and ease of use. Get your point heights dial…
A 300mm MIPI Cable for interfacing the Raspberry Pi Camera Modules with the Raspberry Pi 5.
A 500mm MIPI Cable for interfacing the Raspberry Pi Camera Modules with the Raspberry Pi 5.
The SparkFun RP2350 Pro Micro provides a powerful development platform in our compact Pro Micro form factor built around the…
The RP2040 is the debut microcontroller from Raspberry Pi.
Raspberry Pi Pico development board featuring the RP2350 Cortex M processor with dual RISC-V Hazard3 cores.
Switching large loads with a microcontroller is a common task and there are a lot of ways to approach it. In most application…
This SparkFun Thing Plus is a development board featuring the u-blox NORA-W306 module and a dual processor core with 2.4GHz …
The APA-104-1010 takes addressable LEDs to a new, smaller level. Using the standard one-wire (DI/DO) interface, these microsc…
The M7E-Hecto is a UHF RFID RAIN module allowing for the simultaneous reading of up to 300 tags per second.
Don't let batteries get you down, learn all their secrets with this 24 page zine of batteries, power, and cool facts about ho…
Do you want to know more about resistance? Resistors feel simple yet confusing? Heres 24 pages of my fav resistor FACTS!
Buttons and switches, simple, right? Nope! Check out this zine full of cool button facts!
Love LEDs is dedicated to explaining basic LED facts that can come in handy.
Check out this beautifully designed and illustrated zine full of WIRE FACTS!
The SparkFun RTK Evaluation Kit is the perfect development platform for your fixed or mobile high-precision positioning and n…
The HAKKO FX-888DX Digital Soldering Station improves the user interface from the FX-888D using a more intuitive method for a…
The MyoWare® 2.0 Muscle Sensor Wireless Kit is an Arduino-compatible, all-in-one electromyography (EMG) sensor kit.
This is a jumper adapter cable that comes pre-terminated with a 6-pin JST-SH connector on one end and a breadboard hookup pig…
A flexible USB-A to Micro-B, USB 2.0 cable.
This is a flexible USB-A to USB-C cable.
Need a USB-C cable that allows you to transfer data _and_ switch power? This is it!
The TCT40 distance sensor is great for non-contact distance readings from 2cm to 400cm. This unit adds a pair of Qwiic connec…
A development board that supports all fundamental network features to build a Thread Border Router and integrates rich produc…
A Sub-Ethernet daughter board which works with the ESP Thread Border Router board to extend an Ethernet interface.
The Shapeoko 5 Pro, built to run all day, every day, giving you maximum productivity and profit.
Not only are these clamps heavy-duty and molded from glass-filled nylon, they're magnetically actuated making removal quick a…
The Crush It Pro Clamps are crafted from 6061 aluminum.
This kit includes an assortment of hardware to expand your clamping abilities.
Sweepy Pro is perfect for wood, plastic, or composite materials.
The ER-11 Compact Router was made for use in CNC machines so we skip all of the bases and jigs that won't be used anyway.
Keep your Shapeoko 5 Pro and linear rails up and running with this maintenance kit.
