Resistor 10K Ohm 1/6th Watt PTH - 20 pack

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-downs, and current limiters. We've opted for a new and more breadboard-friendly lead thickness (they're a bit thicker than our last ones).

These resistors come in bags of 20.

Resistor 10K Ohm 1/6th Watt PTH - 20 pack Product Help and Resources

Blynk Board Project Guide

March 25, 2016

A series of Blynk projects you can set up on the Blynk Board without ever re-programming it.

Core Skill: Soldering

This skill defines how difficult the soldering is on a particular product. It might be a couple simple solder joints, or require special reflow tools.

1 Soldering

Skill Level: Noob - Some basic soldering is required, but it is limited to a just a few pins, basic through-hole soldering, and couple (if any) polarized components. A basic soldering iron is all you should need.
See all skill levels

Core Skill: Electrical Prototyping

If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.

1 Electrical Prototyping

Skill Level: Noob - You don't need to reference a datasheet, but you will need to know basic power requirements.
See all skill levels


Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • PalmTreesandPICs / about 12 years ago / 4


  • LED addict / about 10 years ago / 1

    Does Sparkfun have any plans to stock some higher wattage value resistors?

  • Member #508945 / about 10 years ago / 1

    why does it say 1/4 watt and 1/6 watt at the same time?

    • Kamiquasi / about 10 years ago / 1

      Because humans sometimes make mistakes - thanks for pointing it out :)
      Looks like the title got updated, and 1/6W is it.

  • SICCREATIONS / about 12 years ago / 1

    I ordered these and saw on the label 330 ohm resistors. I thought the label was wrong and checked the color coding and they are 330 ohm resistors. Do I have to order a new 10K pack resistors or can I get reimbursed?

Customer Reviews

No reviews yet.