- Home
- Product Categories
- USB
- USB 3.1 Cable A to C - 3 Foot
USB C is fantastic. But until we have converted all our hubs, chargers, and ports over to USB C this is the cable you're going to need. Supporting USB 3.1 speeds and charging up to 3A, this 1 meter cable is perfect for high data rate transfers and charging via USB 3.0 or above ports with an A type connector. The USB A to C connectors are of top quality and feel great. The 3.3ft length is perfect for laptop use.
This cable sports all USB 3.1 signals including two individually shielded super speed pairs, D+/-, and large gauge VBUS/GND wires. Because of the increased conductors this cable is similar in diameter to a classic USB A to B cable (on say a printer) versus our thinner USB 2.0 cables better suited for charging or USB 2.0 data transfers. Be sure to compare the inner wire images as this cable is a work of cable-ceation-art!
USB 3.1 Cable A to C - 3 Foot Product Help and Resources
MicroMod All The Pins (ATP) Carrier Board
October 21, 2020
Access All The Pins (ATP) of the MicroMod Processor Board with the Carrier Board!
Connector Basics
January 18, 2013
Connectors are a major source of confusion for people just beginning electronics. The number of different options, terms, and names of connectors can make selecting one, or finding the one you need, daunting. This article will help you get a jump on the world of connectors.
Comments
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Customer Reviews
4.5 out of 5
Based on 4 ratings:
Works well!
Pretty good flexibility without being to flimsy. I get decent charge speed from my good wall chargers. Overall pretty happy.
It's a cable!!
Works fine
A bit stiff but it works.
What is the wire gauge of the power wires?