×

SparkFun Electronics will be closed on November 26, 2020 and November 27, 2020 for the Thanksgiving holiday. We will begin normal operations at 9:00 AM Mountain Time on November 30, 2020.

×

Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

Argon POLY+ Raspberry Pi 4 Case

A basic case with some not so basic features. The Argon POLY+ Raspberry Pi 4 Case uses a three piece snap-fit plastic design to protect your Pi 4 in a cost-effective way. The case has a two step cover similar to that of the Argon NEO which provides covered protection for the board while leaving the I/O ports accessible and includes a top cover which covers all but leaves room for most HATs and PHATs to sit inside. Also included is a heat sink for the processor and thermal tape to attach it.

We recommend looking at the aluminum counterparts to this case if you plan on using the Pi for processor intensive applications. You can also use the Fan HAT from Argon as well.

  • 3-Piece press fit case
  • Heatsink for the main processor
  • Thermal Tape to attach the heatsink

Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

Customer Reviews

No reviews yet.