Hot-Air Rework Station - 303D

This hot-air rework station is great for professionals and hobbyists in need of tight temperature tolerances and large air flows. This unit displays a digital readout of the actual air temperature with a flow rate of up to 23L per minute. This very powerful unit can be used for multiple applications including standard SMD reflow/repair/removal, thermal IC stress testing, thermoplastic welding, and shrink-wrapping.

Each 303D Hot-Air Rework Station has two knobs on the front of the case to control air flow as well as temperature. These knobs are labeled Low to High allowing you to adjust the 303D almost immediately. This rework station even has a detachable power cable so if you happen not to live in North America, you can replace it to fit your own standard plug provided it still uses 110/120V.

This latest version of the hot-air rework station has some great improvements. A new temperature range of 100℃-500℃, an auto sleep function, and a temperature offset function.

  • 303D Hot Air Rework Station
  • Wand Holder
  • x2 Round Nozzle Tips
  • Closed-loop temperature control
  • Heats up quickly
  • Anti-static design
  • Intelligent cooling system maintains airflow after the unit is powered off until the air temperature is below 100°C
  • Temperature adjustment range: 100 ~ 500°C
  • Auto sleep function
  • Temperature offset function
  • Handle length (including air line): 120cm
  • Noise: <40dB
  • 110VAC input
  • Removable power cable
  • Dimensions: 224 x 126 x 110mm

Hot-Air Rework Station - 303D Product Help and Resources

How to Use a Hot Air Rework Station

April 10, 2018

Hot-air stations or heat guns are very useful tools and are essential for any electronics workbench. When working with or building printed circuit boards, there is a lot of room for errors to be made. Have no fear though, there are ways to remedy this with a hot air rework station!

Core Skill: Soldering

This skill defines how difficult the soldering is on a particular product. It might be a couple simple solder joints, or require special reflow tools.

3 Soldering

Skill Level: Competent - You will encounter surface mount components and basic SMD soldering techniques are required.
See all skill levels


Core Skill: Electrical Prototyping

If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.

1 Electrical Prototyping

Skill Level: Noob - You don't need to reference a datasheet, but you will need to know basic power requirements.
See all skill levels


Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

Customer Reviews

No reviews yet.