- Home
- Product Categories
- Buttons and Switches
- Limit Switch End Stop Module with Cable
Limit Switch End Stop Module with Cable
This limit switch end stop module is a collision detection board. When the arm of the collision module bumps into something it will send a signal out and an LED on the board will also light up.
- Collision Board
- Hookup Cable
- Power Supply VCC: 3V-12V
- GND connected to power ground
- OUT output high and low
Limit Switch End Stop Module with Cable Product Help and Resources
Core Skill: Programming
If a board needs code or communicates somehow, you're going to need to know how to program or interface with it. The programming skill is all about communication and code.
Skill Level: Rookie - You will need a better fundamental understand of what code is, and how it works. You will be using beginner-level software and development tools like Arduino. You will be dealing directly with code, but numerous examples and libraries are available. Sensors or shields will communicate with serial or TTL.
See all skill levels
Core Skill: Electrical Prototyping
If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.
Skill Level: Rookie - You may be required to know a bit more about the component, such as orientation, or how to hook it up, in addition to power requirements. You will need to understand polarized components.
See all skill levels
Comments
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Customer Reviews
No reviews yet.