Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
This is a simple LED-illuminated tactile button with a green cap. It's just like a basic tactile button, but it lights up gre…
This is a joystick very similar to the 'analog' joysticks on PS2 (PlayStation 2) controllers. Directional movements are simpl…
We designed this board to give the user a low profile button without any sharp edges. Button closes when you push it and open…
It's the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated p…
This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, pa…
This is a simple 4-pack of momentary, multicolor buttons, great for all sorts of projects! Unlike previous iterations of mult…
Knobs are a great way to finish off your project and make it easier to adjust the level of your death ray. This knob mates to…
4-way Pacman type arcade joystick. Heavy duty design gives this joystick a great feel!
This is a simple 12-pack of momentary, multicolor buttons, great for all sorts of projects!
The SparkFun Qwiic Button with red LED simplifies all of those nasty worries away into an easy to use I2C device, no solderin…
This is a simple SPDT slide switch - great for use as an ON/OFF button, or just as a general control switch. The pins are spa…
The SparkFun Qwiic Joystick combines the convenience of the Qwiic connection system and an analog joystick.
This simple on-off switch is rated for 20A at 12V but who cares about all that, it looks way awesome. These toggle switches c…
This IR proximity contactless button makes for a good replacement for typical push buttons
This is a 16mm thumb joystick.
We use these little buttons on everything! These Miniature Single Pole Single Throw switches have a good click to them and ar…
This little round on/off toggle switch is rated up to 10A at 125VAC and can be panel mounted in a 20mm diameter hole. It'll a…
The SparkFun Qwiic Button with green LED simplifies all of those nasty worries away into an easy to use I2C device, no solder…
This is a standard 12mm square momentary button. What we really like is the large button head and good tactile feel (it 'clic…
It's not what project you have in mind that may use a rocket launch switch... The question is what project will you come up w…
Simple SPDT slide switch. Rated at 30V/200mA. The pins have .1" spacing - fits great into a breadboard! Use it as a power swi…
The SparkFun Qwiic Keypad comes fully assembled and makes the development process for adding a 12 button keypad easy.
Cherry MX Keyswitches are top-of-the-line mechanical keyboard switches. They’re satisfyingly “clicky”, reliable up to t…
This is a heavy duty SPST toggle switch - your basic on/off toggle. Rated for 2A at 250V or 4A at 125V. Includes a face plate…
This is a basic 12 button keypad that has been designed for easy user input and functionality.
These panel-mounting rocker switches have built-in indicator lights to let you know when your switch is engaged. They mount i…
Surface mount 3-way switch. These switches are commonly found on handheld devices like MP3 players. This switch allows the us…
This is the Magnetic Door Switch Set, a small reed switch assembly specifically designed to alert you when doors, drawers, or…
This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. T…
This is the breakout board for the [thumb joystick](http://www.sparkfun.com/commerce/product_info.php?products_id=9032). Pins…
This is an SMD 6mm square SPST button. What we really like is the little button head and good tactile feel (it ‘clicks’ r…
This is a joystick thumb pad very similar to the thumb pads on PlayStation controllers.
We use barrel jacks a lot around here and sometimes we need to pop a switch into the mix. That usually means hacking up a per…
It's your basic black action button! This is a very useful, small, panel-mount momentary switch. It is a SPST N.O. with the t…
Miniature surface mount momentary button. These are great, low-profile momentary switches. Perfect as a tactile reset switch.…
Although small in size, this roller microswitch is rated for controlling electrical loads ranging from logic level to power d…
This is a 3-terminal microswitch two pack, each equipped with a 20mm offset lever actuator. These switches have a great 'clic…
This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect fo…
This little round on/off/on toggle switch is rated up to 10A at 125VAC and can be panel mounted in a 20mm diameter hole.
