Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
The Qwiic pHAT Extension for the RPi400 provides you with an easy way to access all GPIO, stack your favorite HAT upright or …
Make the Raspberry Pi Pico the core of your new buggy project with the Kitronik Compact Motor Driver Board for Raspberry Pi P…
The micro:bit Edge Connector - SMD, Right Angle (40-pin) allows you to expand the capabilities of the BBC micro:bit.
The Raspberry Pi Compute Module 4 represents a huge change for the Compute Module line. The biggest change being the move fro…
A green USB A to Micro B cable for use with the micro:bit.
The Argon POLY+ Raspberry Pi 4 Case uses a three piece snap-fit plastic design to protect your Pi 4 in a cost-effective way.
The Kitronik Smart Air Quality Board for Pico provides a complete air monitoring and reporting solution for the Raspberry Pi …
A 200mm MIPI Cable for interfacing the Raspberry Pi Display Modules with the Raspberry Pi 5.
The Raspberry Pi Compute Module 3+ contains the guts of a Raspberry Pi 3 Model B+ with 8GB of eMMC Flash memory.
Thanks to the SparkFun gator:soil micro:bit Accessory Board, you can now measure the moisture level in soil without any vocal…
The SparkFun RP2040 mikroBUSâ„¢ Starter Kit is designed to give you just what you need to start using the Click, Qwiic, and R…
This is a basic baseplate for the Raspberry Pi 3 B+. The baseplate is designed for the RPi to remain on the attached via fric…
A 2 x AAA battery box with a JST connector for powering the micro:bit.
A 2 x AAA battery box with a JST connector and on/off switch for powering the micro:bit.
The pi-topCEED is a DIY desktop computer that helps you start learning how to code, create awesome devices and take your know…
This is the 8mm M-12 mount standard lens for use with the Raspberry Pi HQ Camera Module M-12.
This is the 25mm M-12 mount telephoto lens for use with the Raspberry Pi HQ Camera Module M-12.
The Compute Module 4 packs all the best features of the Raspberry Pi Model B 4 into a more favorable form-factor for embedded…
The is the official, 1m, HDMI to HDMI Cable for use with the Raspberry Pi.
The SparkFun gamer:bit is a fun-filled "carrier" board for the micro:bit that, when combined with the micro:bit, provides you…
This 2x13 shrouded header has the same number and spacing of pins as the Raspberry Pi so you can easily connect via ribbon ca…
The Argon NEO RPi 4 Case is a plastic and aluminum enclosure that properly protects and cools your Pi 4 without obstructing a…
The PiJuice is a fully uninterruptible power supply HAT that will always keep your Raspberry Pi powered.
**Note:** This camera case does not currently fit the [Raspberry Pi Camera Module V2](https://www.sparkfun.com/products/14028…
The Raspberry Pi Compute Module 3+ contains the guts of a Raspberry Pi 3 Model B+ with 16GB of eMMC Flash memory.
The NVIDIA® Jetson Nanoâ„¢ 2GB Developer Kit delivers the performance to run modern AI workloads at a small form factor, low…
The Raspberry Pi Compute Module 3+ contains the guts of a Raspberry Pi 3 Model B+ with 32GB of eMMC Flash memory.
The Raspberry Pi Global Shutter Camera is a specialized 1.6-megapixel camera from Raspberry Pi that is able to capture rapid…
This is the official case for the Raspberry Pi 3 Model A+ (it also fits the Raspberry Pi 1 Model A+ as well).
If you're looking for a fully-featured Raspberry Pi 4 case, then look no further than the Argon ONE Pi 4 Raspberry Pi Case.
The Raspberry Pi Zero is half the size of a Model A+, with twice the utility. A tiny Raspberry Pi that’s affordable enough …
The Raspberry Pi is everybody's favorite little computer, the last thing that you'd want is for something bad to happen to it…
The Argon40 Fan HAT for the Raspberry Pi Model B boards is a great way to cool your board during more intensive applications.
This 8mp camera module is capable of 1080p video and still images that connect directly to your Raspberry Pi.
The Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces featuring the ne…
The SparkFun gator:microphone is a micro:bit Accessory Board that integrates a microphone into SparkFun's gator:bit series of…
The Raspberry Pi Compute Module 4 represents a huge change for the Compute Module line.
This is a 1024 x 600 resolution IPS display touchscreen for the Raspberry Pi.
Utilize this kit to turn your Jetson Nano into a mobile machine with things like object following, collision avoidance via th…
The Compute Module 3+ Development Kit is made for developing industrial applications with CM3+, CM3+/Lite, CM3, CM3 Lite, and…
This is a class 10, 16GB, micro SDHC card that has been pre-installed with the NOOBS operating system for the Raspberry Pi.
Have some fun coding your very own AI robot with TJBot, a do-it-yourself template to learn, experiment with and explore AI wi…
The PoE+ HAT allows you to power your Raspberry Pi using Power over Ethernet networks with up to 25.5 Watts (PoE+) over CAT5 …
Feeling Fancy? The SparkFun Top pHAT is the fundamental machine learning add-on for Raspberry Pi or any 2x20 GPIO SBC!