Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow.
We all know that you can never get too many LEDs. Don't worry, we've got you covered. This is a pack of 25 LEDs all convenien…
This is a very simple, clear infrared LED. These devices operate between 940-950nm and work well for generic IR systems inclu…
The SparkFun Lumenati 8-pack is a coin-sized board equipped with seven APA102C LEDs surrounding the outer edge of the board, …
LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. …
Your basic 7-segment LED. Common anode. Two decimal points, but only the one on the right is wired. Digit height is 0.6". Ove…
This is the 16 LED NeoPixel Ring from Adafruit, a small chainable 1.75" (44.5mm) outer diameter board equipped with 5050 WS28…
These are *very* bright LEDs. The LEDs are so bright that it hurts to look directly at them. Please take a look at the pictur…
This is a simple 5mm LED with an interesting array of applications. This [UV](http://en.wikipedia.org/wiki/Ultraviolet) LED c…
These 5mm units have four pins - one for each color and a common cathode (the longest pin).
The Mi-Light LED Controller Box is a 2.4GHz RF LED accessory that enables your non-addressable LED strips to change color, di…
Huge 10mm through-hole LEDs. Mood-light an entire wall!
These 10 segment bar graph LEDs have many uses. With a compact footprint, simple hookup, they are easy for prototyping or fin…
Huge 10mm through-hole LEDs.
For a long time we've had small 7-segment displays and *huge *7-segment displays, but now we finally have something in betwee…
The gator:starter ProtoSnap has been designed to provide you with a staring point to go beyond the capabilities of the SparkF…
This is a basic, 4-digit 7-segment display - blue in color. It has a common anode. The display features one decimal point per…
The PI22TAT5R5G5B-2427 is a mouthful, but it's also an addressable RGB LED in a *very* small 2.4x2.7mm package. This four pin…
The MAX7219CNG is a compact, serial input/output common-cathode display driver that can interface microprocessors to 7-segmen…
These plastic LED holders have a black finish and only need the LED and the holder to be snapped into place easily and effect…
This is a very simple, clear infrared LED. These devices operate between 840-850nm and work well for generic IR systems inclu…
There are more and more hobbyists taking advantage of surface mount technology these days. With affordable tools like hot air…
This is a basic, 4-digit 7-segment display - green in color. It has a common anode. The display features one decimal point pe…
The Pimoroni Blinkt! is a "shield" for the Raspberry Pi, equipped with eight super-bright and addressable RGB LEDs that make …
Affectionately dubbed "Fairy Lights" for their similar appearance, these LED string lights are a great way to light up any pr…
The SparkFun Lumenati 90L is a small quarter-circle board equipped with three APA102C LEDs and a single mounting position.
MIKROE 8800 Retro Click is a compact add-on board that simplifies the control of multiple LEDs.
These plastic LED holders have a slick chrome finish and make it possible to panel-mount your indicator lights for a clean lo…
The gator:color ProtoSnap is perfect if you want to add a low-profile glowing component to your project.
This blue-green EL Wire contains a special bendable wire core that allows you to articulate and mold your EL wire any way tha…
The SparkFun Lumenati 90R is a small quarter-circle board equipped with three APA102C LEDs and a single mounting position.
MIKROE RGB Driver Click is an RGB LED driver, capable of driving RGB LED stripes, LED fixtures and other RGB LED applications…
Use this jig to hold your 5mm LEDs while bending the legs over and mount to the side of your board.
