Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
The gator:starter ProtoSnap has been designed to provide you with a staring point to go beyond the capabilities of the SparkF…
MIKROE 8800 Retro Click is a compact add-on board that simplifies the control of multiple LEDs.
MIKROE 10x10 RGB Click is a matrix of 100 "intelligent" RGB elements, forming a 10x10 display screen.
This is a basic, 4-digit 7-segment display - blue in color. It has a common anode. The display features one decimal point per…
Sometimes when you have too many choices, it's hard to make a good decision. In fact, there are times when you just want a ba…
LED Driver 6 Click is a high brightness LED or LED strip driver, designed to be used in tunable Smart Connected Lighting (SCL…
LED Driver 7 Click is a Click board™ equipped with the LTC3490, single cell 350mA LED driver from Analog Devices.
7-SEG RGB Click carries a full color single 7 segment digit display.
Light Temp Click is a dual-channel LED driver, designed to be used in tunable Smart Connected Lighting (SCL) applications.
LED Driver 12 Click is a compact add-on board that simplifies the control of multiple LEDs.
16x9 Click is an array of 144 LEDs, driven by a single IC with relatively low pin count (28).
7-segment LED display is the most commonly used type of display to represent changing numerical values.
These are the same RGB LEDs that were used for the old WS2801 breakout board. They're great when you need a lot of color from…
BIG 7-SEG R Click is what you need if you want to add a seven-segment LED display to your project.
BarGraph 3 Click is equipped with a five-segment LED bar graph display, notable for its strong and uniform illumination of th…
LED driver Click carries the MCP1662 high-voltage step-up voltage driver from Microchip.
Matrix RGB Click is a mikroBUS™ add-on board powered by a 32-bit FT900 MCU designed specifically for powering 16x32 RGB LED…
Matrix R Click is a mikroBUS™ add-on board with two red 5x7 matrices driven by two MAX7219 8-bit LED Display Drivers.
LED Driver 9 Click is a compact add-on board that simplifies the control of multiple LEDs.
LED Driver 13 Click is a compact add-on board that simplifies the control of multiple LEDs.
LED Driver 4 Click is a form of a high-efficiency boost converter that is ideally suited for driving an array of white LEDs.
UT-L 7-SEG R Click carries two SMD ultra thin LED 7-SEG displays and the MAX6969 constant-current LED driver from Analog Devi…
MIKROE PWM 2 Click offers 48 independently controlled PWM channels, available over the onboard headers, perfectly suited for …
Matrix G Click is a mikroBUS™ add-on board with two green 5x7 matrices driven by two MAX7219 8-bit LED Display Drivers.
LED driver 2 Click carries the MCP1643 - LED constant current regulator, made by Microchip.
LED Ring R Click is a mikroBUS™ add-on board with a ring of 32 red LEDs driven by four 8-bit 74HC595 serial-in, parallel-ou…
MIKROE LED Driver 11 Click is a compact add-on board that simplifies the control of multiple LEDs.
MCP1664 Click contains 4 high-power white LEDs.
MIKROE LED Driver 10 Click is a compact add-on board that simplifies the control of multiple LEDs.
LED Flash Click functions as a high power LED flash, and carries the CAT3224 flash LED driver.
UVC Light Click board™ includes uses two 0.7W, 275nm LEDs and one green LED that allow users to see approximate area where …
4x4 RGB Click is a matrix of 16 "intelligent" RGB elements, forming a 4x4 display screen.
AlphaNum Click is a simple solution for adding 14-segment alphanumeric display to your device.
AlphaNum G Click is a simple solution for adding 14-segment alphanumeric display to your device.
UT-M 7-SEG R Click carries two SMD ultra thin LED 7-SEG displays and the MAX6969 constant-current LED driver from Analog Devi…
MIKROE DALI Click is a compact board that provides Digital Addressable Lighting Interface (DALI) to your design.
BarGraph Click is a 10-segment bar graph display Click, which uses a high-quality bar graph LED display.
8x8 B Click is a 64 LED matrix display Click board™, composed of SMD LEDs organized in 8 rows by 8 columns.
8x8 G Click is a 64 LED matrix display Click board™, composed of SMD LEDs organized in 8 rows by 8 columns.
8x8 Y Click is a 64 LED matrix display Click board™, composed of SMD LEDs organized in 8 rows by 8 columns.
DALI stands for Digital Addressable Lighting Interface and it was first introduced in the late ‘90s.
LED Flash 2 Click is a powerful flash/torch click, featuring the MIC2870 from Microchip.
MIKROE LED Driver 3 Click is an RGB LED driver, capable of driving RGB LEDs with up to 30mA per segment, via the digital I2C …
BarGraph 2 Click is a 10-segment bar graph display Click, which uses a high-quality, multicolor bar graph LED display.
LED Driver 14 Click is a compact add-on board that simplifies the control of multiple LEDs.
MIKROE 8x8 R Click is a 64 LED matrix display Click board™, composed of SMD LEDs organized in 8 rows by 8 columns.
MIKROE BarGraph 4 Click is a compact add-on board that contains four green four-segment LED bar graph displays.
LED Driver 8 Click is a compact add-on board optimized for dimming and blinking 32 mA RGBA LEDs.
