×

Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

Qwiic Cable - 500mm

This is a 500mm long 4-conductor cable with 1mm JST termination. It's used to connect Qwiic boards together.

This cable is used for connecting Qwiic boards that need to be very far away from the controller. Note that I2C signals will degrade over longer distances. We recommend keeping the connections to 1 meter or less. That said, we've daisy-chained boards 2 meters (4 of these cables) away from a RedBoard successfully. Your mileage may vary.

The Qwiic system enables fast and solderless connection between popular platforms and various sensors and actuators. You can read more about the Qwiic system here. We carry 50mm, 100mm, 200mm, 500mm, and breadboard friendly Qwiic cables.

  • 500mm (19.6") length
  • 28AWG bonded wire
  • Connector: SHR04V-S-B
  • Mating connector: SM04B-SRSS or equivalent
  • Black/Red/Blue/Yellow color wiring
  • Wired straight through

Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

Customer Reviews

No reviews yet.