Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
added to your cart!
This is the FemtoBuck, a small-size single-output constant current LED driver. Each FemtoBuck has the capability to dim a sin…
The SparkFun Large Digit Driver is a chainable controller backpack that can be soldered directly to the back of our large [6.…
The PicoBuck LED Driver is an economical and easy to use driver that will allow you to control and blend three different LEDs…
The SparkFun ESP32 DMX to LED Shield is the perfect way to send and receive DMX data whether it's coming in or out over the o…
The TLC5940 is a 16 channel PWM unit with 12-bit duty cycle control (0-4095), 6 bit current limit control (0-63), and a daisy…
The SparkFun LP55231 LED Driver Breakout is a self-contained solution for developing and deploying the nine-channel I2C LED c…
With the SparkFun LumiDrive you will be able to control and personalize a whole strand of APA102s directly from the board its…
MIKROE PWM Click is a simple solution for controlling 16 PWM outputs through a single I2C interface.
The Mi-Light LED Controller Box is a 2.4GHz RF LED accessory that enables your non-addressable LED strips to change color, di…
MIKROE 8x8 R Click is a 64 LED matrix display Click board™, composed of SMD LEDs organized in 8 rows by 8 columns.
LED Driver 8 Click is a compact add-on board optimized for dimming and blinking 32 mA RGBA LEDs.
UVC Light Click board™ includes uses two 0.7W, 275nm LEDs and one green LED that allow users to see approximate area where …
LED Driver 7 Click is a Click board™ equipped with the LTC3490, single cell 350mA LED driver from Analog Devices.
LED Driver 6 Click is a high brightness LED or LED strip driver, designed to be used in tunable Smart Connected Lighting (SCL…
Light Temp Click is a dual-channel LED driver, designed to be used in tunable Smart Connected Lighting (SCL) applications.
LED Driver 5 Click is a Click board™ capable of driving an array of high-power LEDs with constant current, up to 1.5A.
LED Driver 4 Click is a form of a high-efficiency boost converter that is ideally suited for driving an array of white LEDs.
LED Flash 2 Click is a powerful flash/torch click, featuring the MIC2870 from Microchip.
LED driver 2 Click carries the MCP1643 - LED constant current regulator, made by Microchip.
LED driver Click carries the MCP1662 high-voltage step-up voltage driver from Microchip.
LED Flash Click functions as a high power LED flash, and carries the CAT3224 flash LED driver.
MCP1664 Click contains 4 high-power white LEDs.
16x9 Click is an array of 144 LEDs, driven by a single IC with relatively low pin count (28).
Matrix G Click is a mikroBUS™ add-on board with two green 5x7 matrices driven by two MAX7219 8-bit LED Display Drivers.
Matrix R Click is a mikroBUS™ add-on board with two red 5x7 matrices driven by two MAX7219 8-bit LED Display Drivers.
Matrix RGB Click is a mikroBUS™ add-on board powered by a 32-bit FT900 MCU designed specifically for powering 16x32 RGB LED…
LED Ring R Click is a mikroBUS™ add-on board with a ring of 32 red LEDs driven by four 8-bit 74HC595 serial-in, parallel-ou…
4x4 RGB Click is a matrix of 16 "intelligent" RGB elements, forming a 4x4 display screen.
8x8 B Click is a 64 LED matrix display Click board™, composed of SMD LEDs organized in 8 rows by 8 columns.
8x8 Y Click is a 64 LED matrix display Click board™, composed of SMD LEDs organized in 8 rows by 8 columns.
LED Driver 13 Click is a compact add-on board that simplifies the control of multiple LEDs.
LED Driver 14 Click is a compact add-on board that simplifies the control of multiple LEDs.
LED Driver 12 Click is a compact add-on board that simplifies the control of multiple LEDs.
8x8 G Click is a 64 LED matrix display Click board™, composed of SMD LEDs organized in 8 rows by 8 columns.
MIKROE PWM 2 Click offers 48 independently controlled PWM channels, available over the onboard headers, perfectly suited for …
MIKROE DALI Click is a compact board that provides Digital Addressable Lighting Interface (DALI) to your design.
DALI stands for Digital Addressable Lighting Interface and it was first introduced in the late ‘90s.
MIKROE LED Driver 3 Click is an RGB LED driver, capable of driving RGB LEDs with up to 30mA per segment, via the digital I2C …
MIKROE RGB Driver Click is an RGB LED driver, capable of driving RGB LED stripes, LED fixtures and other RGB LED applications…
MIKROE 8800 Retro Click is a compact add-on board that simplifies the control of multiple LEDs.
MIKROE LED Driver 11 Click is a compact add-on board that simplifies the control of multiple LEDs.
MIKROE LED Driver 10 Click is a compact add-on board that simplifies the control of multiple LEDs.
LED Driver 9 Click is a compact add-on board that simplifies the control of multiple LEDs.