With the recent surge in Omicron cases, shipping may be slower than stated times. We are working to build, ship and respond to everything as quickly as possible. Please see all COVID-19 updates here. Thank you for your continued support.
Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Mon-Fri, 9am to 12pm and 1pm to 5pm U.S. Mountain Time:
(303) 284-0979
Jump to Subcategory:
added to your cart!
This is the same temperature sensor that is included in our [SparkFun Inventor's Kit](http://www.sparkfun.com/products/12060)…
The SparkFun Photon Weather Shield is an easy-to-use add-on board that grants you access to barometric pressure, relative hum…
Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to w…
This is an evaluation board for the MLX90614 IR Thermometer. The sensor is connected to an ATmega328 running at 3.3V with a S…
The MCP9700 is a small thermistor type temperature sensor. LilyPad is a wearable e-textile technology developed cooperatively…
MEMs based barometric pressure sensors are quite common these days. The Qwiic Pressure Sensor with the MS5637 shines by being…
The MS8607 from TE is an impressive combination pressure, humidity, temperature (PHT) sensor with accuracy of ±2mbar pressur…
The SST Liquid Level Sensor provides single point liquid detection via a TTL compatible push/pull output. This optical liquid…
The MQ-137 is an Ammonia (NH₃) gas sensor from Winsen. The sensing element is SnO2, which has lower conductivity in clean a…
This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interf…
The MQ-131 is a low concentration Ozone gas sensor from Winsen. The sensing material for the MQ-131 is WO₃.
The Zio Qwiic Loudness Sensor is an I2C device making it easy to measure the noise level in your next project.
The EasyVR 3 Plus Shield is a voice recognition shield for Arduino boards integrating an EasyVR module.
The SparkFun gator:environment utilizes the CCS811 and BME280 ICs to take care of all of your environmental readings of atmos…
Now mounted on a breakout board, the MPL115A1 is a digital barometer that uses MEMs technology to give accurate pressure meas…
The AH1815 is an integrated Hall-Effect non-latched sensor.
10K thermistor with a negative temperature coefficient. Good choice for temp-sensing applications when you need a reliable NT…
Small electret microphone. Useful in acoustic and audio applications.
The MQ-136 is a Hydrogen Sulfide detection sensor with a sensing range of 1 - 200ppm. The sensing element is SnO2 which has l…
The US1881 is an integrated Hall-Effect latched sensor.
The ZMOD4450 Refrigeration Air Quality sensor is designed to measure gases emitted by food ripening or rotting.
The gator:starter ProtoSnap has been designed to provide you with a staring point to go beyond the capabilities of the SparkF…
This is a small device called a [reed switch](http://en.wikipedia.org/wiki/Reed_switch). When the device is exposed to a magn…
The MQ-9B is a CO and CH₄ gas detection sensor form Winsen. The sensing material of the MQ-9B is SnO2, which has a low cond…
This is a stainless steel, Type-K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals, con…
The gator:control ProtoSnap provides you with a handful of different ways to interact with projects you create using only gat…
The MAX31820 ambient temperature sensor provides 9-bit to 12-bit Celsius temperature measurements with ±0.5°C accuracy over…
This non-contact infrared thermometer makes it a breeze to take quick and accurate surface temperature readings without getti…
The LPS25HB is an absolute pressure sensor which means that it has an internal vacuum as a reference. (As opposed to *differe…
The SparkFun gator:microphone is a micro:bit Accessory Board that integrates a microphone into SparkFun's gator:bit series of…
The LilyPad Reed Switch is a simple breakout for a reed switch that will make it easy to use in e-textiles circuits in exactl…
The MPL115A1 is a digital barometer that uses MEMs technology to give accurate pressure measurements between 50kPa and 115kPa…
An accessory board that provides temperature, light, and humidity sensing for IoT applications.
The LM Liquid Level Sensor incorporates stainless steel and plastic isolation features suitable for level sensing in water an…
Pimoroni PIM510 Grow - Grow Kit is a compact Raspberry Pi powered monitoring systems designed to take the best possible care …
The Digilent Pmod AQS is a digital gas sensor for monitoring indoor air quality at low power. With the AMS CCS811, you can de…
The 6-Channel Temperature Monitor can measure temperatures from as low as −240°C up to +850°C (real-world limits greatly …
The SCD4x CO2 Gadget features an RGB LED, with the traffic light color scheme, indicates the indoor air quality based on the …
This CO2 Sensor is designed to meet the needs of OEM manufacturers for low-cost carbon dioxide sensing in harsh environments.…
This sensor offers short lead-times and is suitable for air quality monitoring, gas leak detection, pollution detection among…
The VM1010 is the world’s first ZeroPower ListeningTM piezoelectric MEMS microphone. It provides an ultra-low power always…
This Vibration Sensor Module for Arduino is a cost-effective vibration sensor that features high sensitivity, fast response, …
Infrared Detectors Quad channel sensor for HC (hydrocarbon), CO (carbon monoxide) and CO2 (carbon dioxide).
The MiCS-VZ-89TE Indoor Air Quality Sensor monitors tVOCs and CO2 equivalent variations in confined spaces.
The BMX160+BMP388 10 Depth of Field Sensor combines the BMX160 9-axis absolute orientation sensor and BMP388 barometric press…
Imagine a shield which you can use with any of your Pycom multi-network modules. This is what you get with the Pysense – a …
