Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
added to your cart!
This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interf…
The SparkFun CO2 Humidity and Temperature Sensor - SCD41 (Qwiic) features the SCD40 CO2 from Sensirion©.
This Thermocouple Connector is perfect for bridging the gap between Type-K thermocouples with standard connectors with a PCB.…
The SparkFun CO2 Humidity and Temperature Sensor - SCD40 (Qwiic) features the SCD40 CO2 from Sensirion©.
The SEN55 environmental node is a straightforward, all-in-one sensor solution platform for the accurate measurement of variou…
The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with screw terminals and I2C interface, accessed over…
The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with a PCC Connector and I2C interface, accessed over…
The TMP102 is an easy-to-use digital temperature sensor from Texas Instruments. The TMP102 breakout allows you to easily inco…
The Sensirion Particulate Matter Sensor SPS30 is a compact, high quality, optical particle sensor that uses laser scattering …
This is an evaluation board for the MLX90614 IR Thermometer. The sensor is connected to an ATmega328 running at 3.3V with a S…
The SparkFun Qwiic TMP117 Breakout is a high precision temperature sensor equipped with an I2C interface.
The SparkFun TMP102 Qwiic is an easy-to-use digital temperature sensor equipped with a couple of Qwiic connectors for easy I2…
The SparkFun MAX31855K Thermocouple Breakout is a simple 14-bit resolution, SPI-compatible, serial interface thermocouple dig…
The SEN54 measures particulate matter, VOC, humidity, and temperature in a single package.
36" high temperature Type-K Thermocouple with glass braid insulation.
It is suitable for applications in the temperature range of -200°C to 600°C but are more commonly used in the range -50°C …
The DHT20 is a low cost humidity and temperature sensor with a I2C digital output protocol.
This Thermocouple Connector is perfect for bridging the gap between Type-K thermocouples with standard connectors with a PCB.
This is the same temperature sensor that is included in our [SparkFun Inventor's Kit](http://www.sparkfun.com/products/12060)…
Thanks to its factory calibration the STTS22H offers high-end accuracy performance over the entire operating temperature rang…
The AS6212 digital temperature sensor from AMS provides high-accuracy temperature data combined with excellent power consumpt…
The MCP9700 is a small thermistor type temperature sensor. LilyPad is a wearable e-textile technology developed cooperatively…
This is a stainless steel, Type-K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals, con…
The SparkFun OpenLog Artemis (w/o IMU) Kit is intended to provide everything you need to log the data of your choice with the…
Melexis' MLX90614ESF-BAA is an infrared thermometer designed for non-contact temperature sensing. An internal 17-bit ADC and …
The MAX31820 ambient temperature sensor provides 9-bit to 12-bit Celsius temperature measurements with ±0.5°C accuracy over…
10K thermistor with a negative temperature coefficient. Good choice for temp-sensing applications when you need a reliable NT…
The Nicla Sense ME is a tiny, low-power tool that sets a new standard for intelligent sensing solutions.
MIKROE Fan 8 Click is a compact add-on board that represents a compliant fan controller.
The 6-Channel Temperature Monitor can measure temperatures from as low as −240°C up to +850°C (real-world limits greatly …
Depending on the type of probe you use the Click can measure temperatures from −200 °C to +1372 °C.
MIKROE IrThermo Click 3.3V is a contactless temperature measurement device that relies on the accurate thermopile sensor chip…
MIKROE Surface temp Click is high accuracy digital temperature sensor Click board™, offering breakthrough performance over …