Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Mon-Fri, 9am to 12pm and 1pm to 5pm U.S. Mountain Time:
(303) 284-0979
Chat With Us
Jump to Subcategory:
added to your cart!
This tube clamp allows you to secure two 1" bore tubes at 90 degrees. The tubes are held securely in place by set screws. Pre…
ServoBlocks increase a servo’s load-bearing capabilities by helping to isolate the lateral load from the servo spline and c…
The universal aluminum mounting hub allows you to mount custom wheels and mechanisms to 5 mm motor shafts. The hubs are sold …
The NEMA 17 Stepper Motor Mount connects to the topside of a stepper motor to make integrating it into your [Actobotics](http…
Set screw hubs offer a cheap way to attach hub mount gears or wheels to a shaft. The hub offers 4 equally spaced 6-32 tapped …
These aluminum single servo hub arms can bolt directly to the aluminum hub on servo power gearboxes via four 6-32 x 3/8" mach…
These clamping hubs are a great and cost-effective choice when attaching hub mount gears or wheels to shafts or tubes and can…
These flat bearing mounts attach to the face of a channel or plate and have a ball bearing with a 1/4” bore for shafts. The…
The Aluminum Clamping Motor Mount is great for applications where the perfect motor alignment is needed. When used in conjunc…
These flat bearing mounts attach to the face of a channel or plate and have a ball bearing with a 1/2” bore for shafts. The…
This 1/2” Bore Tube Clamp Hub offers a great way to attach gears, sprockets, wheels or other items to hollow 1/2” aluminu…
Pillow block bearing mounts attach to the outside of a channel and can be used as simple hinges. These bearing mounts have a …
Quad block bearing mounts attach to the inside of a channel and have a ball bearing with a 1/4” bore for shafts. These bear…
The NEMA 23 Stepper Motor Mount connects to the topside of a stepper motor to make integrating it into your [Actobotics](http…
The E Style Motor mount connects to the inside of [Actobotics](https://www.sparkfun.com/pages/Actobotics) channels and works …
This screw plate gives you the ability to attach a 1/4-20 machine screw to [Actobotics](https://www.sparkfun.com/pages/Actobo…
The B Style Motor mount connects to the outside of [Actobotics](https://www.sparkfun.com/pages/Actobotics) channels and works…
These wheel adaptors allow you to adapt 12mm hex drive wheels to our .770” hub pattern. The recessed .770” pattern allows…
These quad hub mounts can attach to the end or the middle of [Actobotics](https://www.sparkfun.com/pages/Actobotics) channels…
These threaded aluminum clamping hubs are perfect for standard applications that need shafting or tubing 1" in diameter secur…
This motor mount connects to other [Actobotics](https://www.sparkfun.com/pages/Actobotics) products with a swivel mount, allo…
This hub adapter lets you connect [Actobotics](https://www.sparkfun.com/pages/Actobotics) parts with a 0.77" hub pattern to p…
These quad hub mounts can attach to brackets, ServoBlocks, or anything that needs a 90 degree angle with additional attachmen…
This PVC clamp mount has a 1.315" bore, providing an easy way to incorporate standard 1" PVC pipe into your next project. A s…
These wheel adaptors allow you to adapt 17mm hex drive wheels to our .770” hub pattern. The recessed .770” pattern allows…
These 1/2" bore hub spacers allow you to space your sprocket, gear, wheel, or other attachment from the mating hub. These hub…
These set screw hubs make it capable to connect a micro gearmotor with a 3mm bore to a precision disk wheel or other object w…
This servo plate provides a mounting ring for your 1/4-sscale servo. Four 6-32 tapped holes hold the servo in place, while 12…
These flat bearing mounts attach to the face of a channel or plate and have a ball bearing with a 3/8” bore for shafts. The…
These 90 degree hub mounts mate directly to [Actobotics](https://www.sparkfun.com/pages/Actobotics) channels in multiple posi…
These GoPro camera mounts provide you with a simple and lightweight way to attach your Hero 3 to your [Actobotics](https://ww…
Quad block bearing mounts attach to the inside of a channel and have a ball bearing with a 3/8” bore for shafts. These bear…
This servo plate allows you to mount your standard-sized servo inside [Actobotics](https://www.sparkfun.com/pages/Actobotics)…
