Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
This is a passive speaker buzzer module with sound frequency control.
added to your cart!
This is a 3.5mm TRRS SMD audio jack. TRRS connectors are the audio-style connectors that you see on some phones, MP3 players …
VS1063 is an easy-to-use, versatile encoder, decoder and codec for a multitude of audio formats. They can be hard to get hold…
The Noisy Cricket Stereo Amplifier, uses the LM4853 which can be configured to output up to 1.5W of power in mono operation o…
The Zio Qwiic Loudness Sensor is an I2C device making it easy to measure the noise level in your next project.
This is a simple 3.5mm TRS stereo audio jack with a screw-on plastic shroud. These are great for projects that plug into head…
This buzzer is an add-on for your RedBot that gives your robot the ability to make awesome beep-boop noises or alerts when so…
The IQaudIO Pi-DAC+ HAT Audio card for the Raspberry Pi delivers outstanding sonic performance and full-HD (24/192) audio cap…
This is a foot-long white audio cable that has been terminated with two TRRS connectors at each end. TRRS connectors are the …
This cable has a standard TRS 3.5mm plug on both ends allowing for easy connections to any 3.5mm jack.
Add some crisp and compact audio to your project with this Mini External USB 2.0 Speaker. It's USB-only and does not require …
Plug (three conductors and a ground) & shroud to hack or repair or add a 4-conductor audio jack into your project.
The STA540 from STMicro is a 4-channel, [class AB](http://en.wikipedia.org/wiki/Electronic_amplifier#Class_B_and_AB) audio am…
This is the kind of 1/4" stereo jack you might find in home stereos and PA systems. Switched contacts allow you to detect whe…
The pi-topSPEAKER allows you to turn up the volume on your pi-top or pi-topCEED. This audio board provides a simple way to in…
TRRS connectors are the 3.5mm audio-style connectors that you see on some phones, MP3 players and development boards. TRRS st…
Looking to add MIDI to your project? This is a female, 5-pin, right-angle DIN 5/180? connector which will interface with most…
This Piezo Alarm is a great option for when you need an audible alarm (or are just looking for a way to prank your friends). …
MIKROE Rec&Play Click is a digital voice recorder on a Click board™.
The SparkFun gator:microphone is a micro:bit Accessory Board that integrates a microphone into SparkFun's gator:bit series of…
The IQaudio Codec Zero delivers bi-directional digital audio signals between Raspberry Pi Zero and its onboard Dialog Semicon…
Build your own home-brew iPod Nano with Pirate Audio Headphone Amp!
Bring an old radio or set of speakers into the 21st century with Pirate Audio 3W Stereo Amp for Raspberry Pi!
This the IQAudio XLR interface board from Raspberry Pi. This board is perfect for those wanting to work with peripheral with …
Simple breakout board for the 3.5mm audio jack. Use this breakout (shipped bare) to allow breadboard or SIP access to the sup…
Pirate Audio Speaker is perfect for making a Lilliputian radio, sound effect player, or even as a teeny-weeny games console!
MIKROE StereoAmp Click functions as a stereo amplifier and is ideal for battery operated devices or as a lab amplifier.
This is an Audio to Alligator Cable, an 8" long 22 AWG wire with two alligator clips at one end and a 2.5mm mono plug at the …
MIKROE AM/FM Click is a RADIO RECEIVER Click board™ that can be used to listen to music from the AM and FM radio bands.
The MIKROE SpeakUp Click is a speech recognition Click board™.
MIKROE MP3 Click is an accessory board in mikroBus™ form factor.
BUZZ 2 Click carries the CMT-8540S-SMT magnetic buzzer transducer.
MIKROE Volume Click is a compact add-on board that provides the user with complete digital volume control.
Buzz 3 Click is a compact add-on board that contains a sounder driver that produces higher volume with a lower current.
GainAMP Click carries the LTC6912 dual channel, low noise, digitally programmable gain amplifier (PGA).
RadioStation Click is a unique Click board™ that can be used to broadcast the music via the FM radio band.
BT Audio 2 Click is Bluetooth audio stream add on board based on BM62 module from Microchip.
MIKROE Headphone AMP Click is a compact add-on board that contains a stereo headphone amplifier.
The main active component of this Click board™ is the TDA7491, a 20W dual BTL class-D audio amplifier IC, from STMicroelect…
AudioAmp 3 Click is a stereo audio amplifier, capable of delivering up to 79W per channel with the 4Ω load.
MIKROE BUZZ Click is an accessory board in mikroBus™ form factor.
EVC Click is a six-channel digital volume controller, equipped with an integrated electronic volume control circuit, which ca…
MIKROE FM Click with it’s Si4703 IC is a complete FM radio tuner in the form of add-on board.
MIKROE Speaker Click is a compact add-on board that contains an audio power amplifier with a high-quality audio reproduction.
AudioAmp 5 Click is a stereo audio amplifier, capable of delivering up to 10W per channel with the 8Ω load.
The MIC 3 Click is a Click board™ that features the SSM2167-1RMZ-R7, a Microphone Preamplifier, from Analog Device.
Microchip’s RN52 Bluetooth audio module delivers high quality audio in small form factor (26.0 mm x 13.5 mm x 2.7 mm).
BT Audio 3 Click is a compact add-on board with high-performing voice and audio post-processing capability for Bluetooth audi…