Standoff - Nylon (4-40; 3/8"; 10 pack)
PRT-10927These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or …
Standoff - Nylon (4-40; 3/4"; 10 pack)
PRT-11796These nylon standoffs are 3/4" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or …
Standoffs Plastic (4-40; 3/8"; 10 pack)
PRT-10461These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or …
Standoffs Plastic - (4-40; 3/4"; 10 pack)
PRT-10462These nylon standoffs are 3/4" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or …
Standoff - Metal Hex (4-40; 3/8"; 10 pack)
PRT-10463Metal Hex Male/Female standoffs. #4-40 thread with 3/8" shank and 3/16" thread length. Can be stacked to create any length. …
Standoff - Metal (4-40; 3/8"; 10 pack)
PRT-10739Metal short standoffs: 3/8" long x 1/4"OD. Used to get your proto board up off the table. #4-40 thread. Fits all development …
Silicone Bumpers - Large (10x16.5mm, 4 pack)
COM-10594Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating …
Standoff - Aluminum Threaded (6-32; 1-1/2")
ROB-12331These threaded aluminum standoffs are 1-1/2” long and have a thread pitch of 6-32, and an outer diameter of 0.25”. **Not…
Shaft Spacer - 1/4"
ROB-12350These plastic shaft spacers have an inner diameter of 1/4” and a thickness of 1/16”. These spacers are ideal for spacing …
Standoff - Aluminum Threaded (6-32; 1-1/4"")
ROB-12247These threaded aluminum standoffs are 1.25” long and have a thread pitch of 6-32, and an outer diameter of 0.25”. These s…
Standoff - Aluminum Threaded (6-32; 1")
ROB-12297These threaded aluminum standoffs are 1" long and have a thread pitch of 6-32, and an outer diameter of 0.25”. **Note:** T…
Standoff - Aluminum Threaded (6-32; 1/2")
ROB-12123These threaded aluminum standoffs are 1/2” long and have a thread pitch of 6-32, and an outer diameter of 0.25”. **Note:…
Standoff - Aluminum Threaded (6-32; 3/4")
ROB-12172These threaded aluminum standoffs are 3/4” long and have a thread pitch of 6-32, and an outer diameter of 0.25”. **Note:…
Standoff - Aluminum Threaded (6-32; 1-1/8")
ROB-12442These threaded aluminum standoffs are 1-1/8” long and have a thread pitch of 6-32, and an outer diameter of 0.25”. **Not…
Standoff - Aluminum Threaded (6-32; 3/8")
ROB-12434These threaded aluminum standoffs are 3/8” long and have a thread pitch of 6-32, and an outer diameter of 0.25”. **Note:…
Standoff - Aluminum Threaded (6-32; 5/8")
ROB-12153These threaded aluminum standoffs are 5/8” long and have a thread pitch of 6-32, and an outer diameter of 0.25”. **Note:…
Standoff - Aluminum Threaded (6-32; 7/8")
ROB-12286These threaded aluminum standoffs are 7/8” long and have a thread pitch of 6-32, and an outer diameter of 0.25”. **Note:…
Center Hole Adapters - 4 pack
ROB-12365These center hole adaptors come in packs of four, are .08” thick, and have an outer diameter .54”. Their ½” diameter l…
Shaft Spacer - 1/2"
ROB-12112These plastic shaft spacers have an inner diameter of 1/2” and a thickness of 1/16”. These spacers are ideal for spacing …
Shaft Spacer - 3/8"
ROB-12441These plastic shaft spacers have an inner diameter of 3/8” and a thickness of 1/16”. These spacers are ideal for spacing …
Shaft Spacer - 5/8"
ROB-12269These plastic shaft spacers have an inner diameter of 5/8” and a thickness of 1/16”. These spacers are ideal for spacing …
Shaft Spacer - 1"
ROB-12193These plastic shaft spacers have an inner diameter of 1” and a thickness of 1/16”. These spacers are ideal for spacing ou…
Standoff - Swage - (0.3125")
PRT-089840.3125" tall, brass [swage](http://www.rafhdwe.com/swage.htm) attachable stand off. Non-threaded.
Standoff - Swage - (0.218")
PRT-089850.218" tall, brass [swage](http://www.rafhdwe.com/swage.htm) attachable stand off. Non-threaded.