Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
PCB mount clip to hold a AAA battery. Sold in single units, you'll need two for each battery. These work great for small, low…
PCB mount clip to hold a AA battery. Sold in single units, you'll need two. These work great for small, low power application…
A simple Lead-acid battery charger for 13.8VDC Lead-acid batteries. It comes in a robust metal enclosure (IP68 rated) with a …
This board is a device that is able to measure the alternating current running through the conductor, using the so-called non…
Use this high-strength acrylic gasket to attach the 0.3W panels from Voltaic Systems to an enclosure.
This is a glass ferrule type fuse. It fits great with our 5mm fuse clips. The fuse is rated for 125VAC, up to 5A. Fuses are p…
This is a 5mm PTH fuse clip intended to be used with our Glass Fuses. **Note: **These are sold in single units. If you inten…
This is a right-angle, 24-pin Molex Mini-Fit Jr.â„¢ connector, commonly used as the power supply connector on [ATX](http://en…
This is an isolated DC-DC converter that accepts 36-72VDC and outputs 5VDC and 20A.
MIKROE Buck & Boost Click is a compact add-on board that contains a configurable power management device.
These Wall Adapter Cables from iPixel are terminated with a standard NA plug at one end and two insulated spade terminal conn…
These are your standard 1.5V AAA alkaline batteries from Rayovac. Don't even think about trying to recharge these. Roughly 75…
Our RedBoards are great. But don't they sometimes seem a little **_BIG_**?! Enter **smĂ´l**, a new range of boards which a…
Use this high-strength acrylic gasket to attach the 0.6W panels from Voltaic Systems to an enclosure.
This is a glass ferrule type fuse. It fits great with our 5mm fuse clips. The fuse is rated for 250VAC, up to 500mA. Fuses ar…
These Adam Tech Wall Adapter Cables are terminated with a standard European (CEE 7/7) plug at one end and three insulated spa…
MIKROE Boost Click carries Microchip’s MIC2606, a 2MHz, PWM DC/DC boost switching regulator available in a 2mm x 2mm MLF® …
MIKROE Charger Click carries both a battery charger controller and a battery charge monitor, along with a battery connector.
This is a through-hole 12mm coin cell battery holder. It's the unit we like to use as RTC backup and SRAM backup for GPS unit…
MIKROE CXPI Click is a compact add-on board that contains a transceiver that supports the next-generation automotive communic…
MIKROE PROFET 2 Click is a compact add-on board that contains a smart high-side power switch.
PWR Meter 2 Click is a compact and accurate power monitoring Click boardâ„¢, capable of measuring and monitoring voltage up t…
Balancer 4 Click is a compact add-on board optimized for overvoltage protection balancing the voltage of serially connected b…
MIKROE Charger 3 Click is a compact add-on board that represents a standalone battery charger with thermal regulation.
MCP16331 Click functions as a buck-boost voltage regulator.
MCP73871 Click is a fully integrated solution for system power delivery and Li-Po/Li-Ion battery charge management.
Charger 6 Click is a compact add-on board that represents a single-cell battery charger.
Charger 13 Click is a single lithium-ion (Li+) cell battery charger.
Step Down 3 Click is a compact add-on board that steps down the voltage from its input to its output.
Smart Buck Click is the two-channel step-down DC/DC converter and regulator, with plenty of additional functions.
Buck 3 Click uses the TPS568215, a 4.5V to 17V Input, 8A synchronous step-down SWIFTâ„¢ converter from Texas Instruments.
USB-C Sink Click is a compact add-on board that contains a standalone autonomous USB power delivery controller.
The QC3.0 Power Supply Set (US) is a USB wall adapter with an input value of AC100-240V, and an output of 6V-6.5V/3A, 6.5V-9V…
BATT-MON 2 Click is a compact add-on board representing a battery monitoring solution.
eFuse 3 Click is a compact add-on board that contains an electronic eFuse.
The Buck-Boost 3 Click is based on the ISL85403, a 2.5A regulator with the integrated high-side MOSFET and a low-side driver,…
This Click uses the MIC33153, a 4MHz DC-DC buck regulator with integrated inductor and Hyperlight Loadâ„¢ technology, from Mi…
Buck 11 Click is equipped with the LMR36015, a synchronous step-down converter, from Texas Instruments.
RMS to DC Click is a board that is used to convert the RMS of the input signal into a DC voltage, with a value directly reada…
VCP Monitor 3 Click is a high precision Voltage, Current and Power measurement Click boardâ„¢ with an input capable of taking…
Buck-Boost 2 Click is equipped with the LTC3115-2, a 40V, 2A synchronous buck-boost DC/DC converter from Analog Devices.
PAC1954 Click is a compact add-on board that contains an energy monitoring solution.
Buck-Boost Click is a compact add-on board that contains a buck-boost DC/DC converter.
MIKROE UPS 3 Click is a compact add-on board that represents a bidirectional active charge/balancing solution.
BUCK 6 Click is an advanced synchronous DC-DC step down (buck) converter, with a very wide input voltage range and reasonably…
Charger 9 click is a Li-Ion (Li+, Li-Po) battery charger, capable of charging one, two or three battery cells.
MIKROE PROFET Click is a compact add-on board that contains a smart high-side power switch.
Step Up Click carries the MCP1665, a high-voltage, 3.6A, integrated switch PFM/PWM boost regulator, available in a 2mm x 2mm …