Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
The ADXL377 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned analog voltage outputs that h…
added to your cart!
This SparkFun Triple-Axis Accelerometer Breakout is a simple Qwiic breakout for the KX134 digital accelerometer from Kionix.
The LSM6DSO 6DoF Breakout is an accelerometer and gyroscope sensor with a giant 9kB FIFO buffer and embedded processing inter…
This breakout board makes it easy to use the tiny MMA8452Q accelerometer in your project. The MMA8452Q is a smart, low-power,…
This breakout board makes it easy to use the tiny MMA8452Q accelerometer in your project. The MMA8452Q is a smart low-power, …
Breakout board for the 3 axis ADXL335 from Analog Devices. This is the latest in a long, proven line of analog sensors - the …
This new version adds two standoff holes as well as an extra decoupling capacitor. The ADXL345 is a small, thin, low power, 3…
The SparkFun Edge Development Board powered by TensorFlow is perfect begin using voice recognition without relying on the ser…
The MicroMod Machine Learning Carrier combines the freedom to explore any processor in the MicroMod lineup without the need f…
The SM-24 geophone element is designed to offer the highest performance in seismic exploration based upon field-proven I/O Se…
This breakout board makes it easy to use the tiny MMA8452Q accelerometer communicate over I2C in your project.
This SparkFun Triple-Axis Accelerometer Breakout is a simple Qwiic breakout for the KX132 digital accelerometer from Kionix.
The LIS3DH Breakout is a smart, low-power, three-axis, capacitive micro-machined accelerometer with 12 bits of resolution tha…
The SparkFun ADXL313 Breakout is a low power, high resolution (up to 13-bits) 3-axis accelerometer for measurement up to ±4g…
We've been using and selling Analog Devices' ADXL accelerometers for a good while now, and now we've found another great part…
The MPU-6050 is a serious little piece of motion processing tech! By combining a MEMS 3-axis gyroscope and a 3-axis accelerom…
The SparkFun H3LIS331DL Triple Axis Accelerometer Breakout is a low-power, high-g accelerometer with I2C and SPI interface op…
Have you ever wanted your project to just "hibernate" until someone picks it up or moves it? It's a great strategy for dramat…
This is a breakout board for the ultra low-power LIS331HH three axis linear accelerometer. The device has a digital I2C/SPI s…
The 6-axis sensor combines a 16-bit tri-axial gyroscope and a 16-bit tri-axial accelerometer featuring Bosch’s automotive-p…
MIKROE 6DOF IMU 14 Click is a compact board that contains a 6-axis MEMS motion tracking device combining a 3-axis gyroscope a…
MIKROE 6 DOF IMU 3 Click is a complete 6-axis detection development board suitable for movement and position tracking devices…
MIKROE 6DOF IMU 2 Click is a mikroBUS™ add-on board with Bosch's BMI160 low power inertial measurement unit (IMU).
The ADXL345 is a small, thin, low power, three-axis MEMS accelerometer with high resolution (13-bit) measurement up to ±16g.…
It features ADXL345 3-axis accelerometer module with ultra-low power and high resolution (13-bit) measurement, from Analog De…
This board features the BMA490L, a high-performance 16-bit digital triaxial acceleration sensor.
Accel 12 Click is an advanced 3-axis motion tracking Click board™, which utilizes the MC3216, a low-noise, and low power 3-…
6DOF IMU 8 Click is an advanced 6-axis motion tracking Click board™, which utilizes the ISM330DLC, a high-performance Syste…
Accel 11 Click features an ultra-low power triaxial accelerometer sensor with embedded intelligence, labeled as the BMA456.
6DOF IMU 4 Click is based on the ICM-20602, a high-performance, 6-axis MEMS MotionTracking™ IC from TDK Invensense.
Accel 8 Click is based around the MPU6050, a motion tracking sensor IC, from TDK Invensense.
The Accel 7 Click is a tri-axis acceleration sensing Click board™ powered by the KXTJ3-1057 14-bit tri-axis digital acceler…
Accel 5 Click features an ultra-low power triaxial accelerometer sensor, labeled as the BMA400.
The Accelerometer sensor is an add-on for your RedBot that provides bump and motion detection. The sensor works by measuring …
The MMA8452Q is a smart low-power, three-axis, capacitive MEMS accelerometer with 12 bits of resolution. This accelerometer i…
Pedometer 3 Click is an acceleration sensing and step counting Click board™ equipped with the KX126-1063, an advanced tri-a…
Imagine a shield which you can use with any of your Pycom multi-network modules. This is what you get with the Pysense – a …
The BMX160+BMP388 10 Depth of Field Sensor combines the BMX160 9-axis absolute orientation sensor and BMP388 barometric press…
Pysense 2.0 X is a 2nd Generation sensor shield which can be used with any Pycom multi-network modules.
AXISENSE-G Gyro Stabilized Tilt Sensor uses gravity for the reference and reports any positive or negative tilt angle in both…
This board carries ST’s LSM9DS1 inertial measurement module that combines a 3D accelerometer, a 3D gyroscope and a 3D magne…
MIKROE Accel 20 Click is a compact add-on board that contains an acceleration sensor.
MIKROE Accel 16 Click is a compact add-on board that contains an acceleration sensor.
MIKROE Accel 17 Click is a compact add-on board that contains an acceleration sensor.
MIKROE Accel 18 Click is a compact add-on board that contains an acceleration sensor.
MIKROE 6DOF IMU 17 Click is a compact add-on board that contains a 6-axis inertial measurement unit.
Piezo Accel Click is a compact add-on board containing an acceleration sensor based on PE technology.
6DOF IMU 13 Click is a compact add-on board that contains an eCompass that consists of a 3-axis linear accelerometer and a 3-…