Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Mon-Fri, 9am to 12pm and 1pm to 5pm U.S. Mountain Time:
(303) 284-0979
Chat With Us
added to your cart!
The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built…
This is the latest evolution of our serial LCD. Included on a single board is a 16x2 LCD and an embedded circuit based around…
The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 20x4 …
The SparkFun Micro OLED Breakout Board breaks out a small monochrome, blue-on-black OLED. It’s "micro", but it still packs …
This is a basic 16 character by 2 line display with a snazzy black background with white characters. Utilizes the extremely c…
This is a basic 16 character by 2 line display. Black text on Green background. Utilizes the extremely common HD44780 paralle…
The Nokia 5110 is a basic graphic LCD screen for lots of applications. It was originally intended to be used as a cell phone …
The SparkFun Qwiic Micro OLED Breakout is a Qwiic enabled version of our popular MicroView and micro OLED display!
The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 …
This is a framed graphical LCD 64x128 with LED backlight. This unit is a very clear STN type LCD with a simple command interf…
This is the latest evolution of our serial LCD. Included on a single board is a 20x4 LCD and an embedded circuit based around…
The SparkFun Flexible Grayscale OLED Breakout is a small grayscale OLED that can be bent up to a 40mm radius without any worr…
This is a 16 character by 2 line display that runs at 3.3V. Utilizes the common ST7066/HD44780 parallel interface ([datasheet…
This is similar to other 16x2 character LCDs that you've seen before but with one vibrant difference: The backlight is actual…
This is the serial backpack for graphic LCDs. The SparkFun Graphic LCD Serial Backpack interfaces to either our [160x128 pixe…
The PaPiRus is a HAT for the RPi that is capable of driving an ePaper display with ease by making use of the existing open so…
The SparkFun TeensyView brings you an easy way to add a small, white-on-black OLED to your Teensy development board. The 128x…
The serial enabled LCD allows you to control a parallel based LCD over a single-wire serial interface. Included in this produ…
The PaPiRus Zero is an ePaper / eInk screen HAT designed for the Raspberry Pi Zero and the Raspberry Pi Zero W.
The SparkFun Photon Micro OLED Shield breaks out a small monochrome, blue-on-black OLED to use with your Photon module. It’…
The Pimoroni Display-O-Tron HAT is a "shield" for the Raspberry Pi that provides you with a 16x3 character LCD, as well as a …
The OLED Expansion Board adds a low-power 0.96″ monochrome display to your Omega. With a resolution of 128×64, you can use…
This accessory for the Love to Code Chibitronics line is an OLED that has been designed to help you understand what’s going…
MoRFeus is a 30 MHz–6 GHz field-configurable Fractional-N wideband frequency converter and signal generator. Its LCD displa…
Forgot your password? No account? Register one!
