Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
This is a simple LED-illuminated tactile button with a green cap. It's just like a basic tactile button, but it lights up gre…
This is a joystick very similar to the 'analog' joysticks on PS2 (PlayStation 2) controllers. Directional movements are simpl…
This is a 16mm thumb joystick.
We designed this board to give the user a low profile button without any sharp edges. Button closes when you push it and open…
This is a basic 12 button keypad that has been designed for easy user input and functionality.
4-way Pacman type arcade joystick. Heavy duty design gives this joystick a great feel!
This is a simple 4-pack of momentary, multicolor buttons, great for all sorts of projects! Unlike previous iterations of mult…
This is a simple 12-pack of momentary, multicolor buttons, great for all sorts of projects!
The SparkFun Qwiic Button with red LED simplifies all of those nasty worries away into an easy to use I2C device, no solderin…
This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, pa…
It's the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated p…
The SparkFun Qwiic Joystick combines the convenience of the Qwiic connection system and an analog joystick.
Knobs are a great way to finish off your project and make it easier to adjust the level of your death ray. This knob mates to…
This simple on-off switch is rated for 20A at 12V but who cares about all that, it looks way awesome. These toggle switches c…
This is a heavy duty SPST toggle switch - your basic on/off toggle. Rated for 2A at 250V or 4A at 125V. Includes a face plate…
Miniature surface mount momentary button. These are great, low-profile momentary switches. Perfect as a tactile reset switch.…
Simple SPDT slide switch. Rated at 30V/200mA. The pins have .1" spacing - fits great into a breadboard! Use it as a power swi…
The SparkFun Qwiic Button with green LED simplifies all of those nasty worries away into an easy to use I2C device, no solder…
The SparkFun Qwiic Keypad comes fully assembled and makes the development process for adding a 12 button keypad easy.
Surface mount 3-way switch. These switches are commonly found on handheld devices like MP3 players. This switch allows the us…
Cherry MX Keyswitches are top-of-the-line mechanical keyboard switches. They’re satisfyingly “clicky”, reliable up to t…
This is a 3-terminal microswitch two pack, each equipped with a 20mm offset lever actuator. These switches have a great 'clic…
This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. T…
This is a standard 12mm square momentary button. What we really like is the large button head and good tactile feel (it 'clic…
This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect fo…
This little round on/off toggle switch is rated up to 10A at 125VAC and can be panel mounted in a 20mm diameter hole. It'll a…
We use these little buttons on everything! These Miniature Single Pole Single Throw switches have a good click to them and ar…
These panel-mounting rocker switches have built-in indicator lights to let you know when your switch is engaged. They mount i…
We use barrel jacks a lot around here and sometimes we need to pop a switch into the mix. That usually means hacking up a per…
This is the Magnetic Door Switch Set, a small reed switch assembly specifically designed to alert you when doors, drawers, or…
This Black Cherry MX keycap will work on all standard size Cherry MX switches. It is designed for the R2 row, but can be used…
This is a single pole, 10 position rotary switch able to select up to 10 different states in a durable package. Unlike our ot…
The SparkFun Qwiic Button Breakout simplifies all of those nasty worries away into an easy to use I2C device, and with our Qw…
This is a simple SPDT slide switch - great for use as an ON/OFF button, or just as a general control switch. The pins are spa…
It's your basic black action button! This is a very useful, small, panel-mount momentary switch. It is a SPST N.O. with the t…
This is the breakout board for the [thumb joystick](http://www.sparkfun.com/commerce/product_info.php?products_id=9032). Pins…
Although small in size, this roller microswitch is rated for controlling electrical loads ranging from logic level to power d…
This is a simple LED-illuminated tactile button with a red cap. It's just like a basic tactile button, but it lights up red! …
Your project will probably need an on/off switch. If you plan to house the project in an enclosure, we found this great rocke…
This is a resistive analog joystick, very similar to those found on the PSP1000. These compact joysticks are different in tha…
It's your basic red action button! This is a very useful, small, panel-mount momentary switch. It is a SPST N.O. with the thr…
This little round on/off/on toggle switch is rated up to 10A at 125VAC and can be panel mounted in a 20mm diameter hole.
This Translucent MX keycap will work on all standard size Cherry MX switches. It is designed for the R2 row, but can be used …
The LilyPad Reed Switch is a simple breakout for a reed switch that will make it easy to use in e-textiles circuits in exactl…
It's not what project you have in mind that may use a rocket launch switch... The question is what project will you come up w…
This plastic knob accepts a 6mm shaft and has a 15mm outer diameter. They simple press-fit onto a shaft. These are clear so t…
This is a joystick thumb pad very similar to the thumb pads on PlayStation controllers.
This is a simple LED-illuminated tactile button with a clear cap. It's just like a basic tactile button, but it lights up blu…
A simple SMD slide switch. Perfect for when you need access to a setting or a power switch from the edge of a PCB buried deep…
This inline switch is great when you just want a simple on/off toggle switch that's already enclosed. Inside is a simple rock…
This a simple breakout PCB for our [2x2 silicone button pads](https://www.sparkfun.com/products/7836). Each LED and button is…
This is a small device called a [reed switch](http://en.wikipedia.org/wiki/Reed_switch). When the device is exposed to a magn…
This IR proximity contactless button makes for a good replacement for typical push buttons
This simple breakout board makes it easy to use our LED tactile switches in a breadboard, or your next project. **Note:** Po…
This Translucent Black Cherry MX keycap will work on all standard size Cherry MX switches. It is designed for the R2 row, but…
This is a simple LED-illuminated tactile button with a clear cap. It's just like a basic tactile button, but it lights up whi…
This is an SMD 6mm square SPST button. What we really like is the little button head and good tactile feel (it ‘clicks’ r…
This is a translucent silicon rubber button pad with 16 buttons, the same found in our Simon Soldering Kits.
Do you need that extra push over the cliff? The Small sized GTE (Goes To Eleven) Knob can fit onto potentiometers with a 6mm …
This a simple breakout PCB for our [4x4 silicone button pads](https://www.sparkfun.com/products/7835). Each LED and button ca…
These are the sturdy little stomp switches that you find on guitar effects pedals. They’re 3PDT (three-pole, double-throw) …
DIP switch with 8 individual switch positions. The pins have .1" spacing - fits great into a breadboard! Works great as gener…
Surface mount DPDT switch for those tight portable designs. Capable of switching up to 1.2VA (360mA at 3.3V and 240mA at 5V).
This is a 3-terminal microswitch, with a small push-button. This switch has a great 'clicky' sound to it, and a nice tactile …
A 5-way tactile switch allows for a joystick-like interface in a very small package. These are surface mount, but easily sold…
This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. We use four 4/40-0.5…
This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at [monome.org](http://monome.…
This is a 33mm round momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for …
This right-angle tactile switch has a great 'click' to it. Also, because it's a through-hole design it's very sturdy. Mount i…
This is a simple knob that connects to the small and medium sized linear slide potentiometers.
This is an SMD 12mm square SPST button. What we really like is the large button head and good tactile feel (it ‘clicks’ r…
This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. Using two of these b…
This is a simple knob that connects to the extra large sized linear slide potentiometer.
The Double Backlit user interface is like the Single Backlit Button, but twice the fun!
This is a mountable SPDT slide switch --- great for use as a general control switch. The pins are spaced by 3.7mm (0.14"), ma…
