The SparkFun LoRa Serial Kit is now enclosed, fully supported, and available!
Today is National Radio Day, and we've got tons of exciting info for you about radio, as well as some of our own radio tuner boards on sale!
The ZED-F9T GNSS Timing Breakout is now available along with a new SiK Telemetry Radio!
A new version of our Tinker Kit is available, along with a new RF board from SparkX and a new LIDAR!
Like so many projects I've tried to undertake using SF products. I repeat the procedures as written only to find that something that is…
To share a point of amusement: Last year I put together a presentation on the Apollo Guidance System that took men to the Moon in 1969. Due…
Hmm. Looking through this blog post, it looks like Alex left the 3D models for the case in the GitHub repo for anyone to print =>…
Where can I get the case? It is nice to see the hardware for a UI for a project but I want the case to put it into. It looks like the case…
Nice catch. I just fixed it. It should be pushed by the end of today to reflect the new firmware v01.00.02. ;D
Easy EDA does some wacky things if your doing a double sided board and you place different components on the same X and Y but on different…
In addition to KiCad, I've also used gEDA and [been ab]used [by] Eagle. gEDA was an "open source" solution, mainly used on Linux, but last I…
Great question! Yes, there is: at the top right-hand side of the designer you'll find a little file icon with a "G" on it that will allow…
One quick question that I didn't see answered in the above: Is it possible to get this to create Gerber files for the newly designed board?…
Product and Supplier Marketing Manager
Content Coordinator and Copy Editor
Junior Marketing Coordinator
Marketing Communications Coordinator
SparkX Jr. Engineer
Chief Business Development Officer (CBDO)
Chief Executive Officer (CEO)
Creative Supervisor and Videographer
Production Associate I
Technical Sales Support Specialist
Marketing Communications Supervisor
I think my favorite memory of Sparkfun was when I took the tour of the facility (I think it was either 2017 or 2018), and met a few of the…