×
SparkFun will be closed Friday 7/3/2020 for the 4th of July holiday. All orders placed after 2 pm MT on Thursday 7/2/2020 will be shipped out on Monday 7/6/2020. SparkFun Support will also resume on Monday 7/6/2020. Have a safe holiday!
We took two of our biggest robotics partnerships from the previous year and combined them into one powerful robot.
Even though the NVIDIA Jetson Nano is a kitchen sink of machine learning features, it isn't equipped with WiFi. We'll show you how!
Today we'll go over the hardware, software and step-by-step build of a project using the NVIDIA Jetson Nano and some SparkFun parts!
The newest version of the JetBot AI Robotics Kit is now available, along with a full line of supporting products.
The JetBot Kit v2.0 was released earlier this week, but we also have two new Thermocouple Amps and Current Sensor Breakouts available!
It's a big Friday with a new XBee 3 Wireless Kit, new versions of the NVIDIA DLI Course Kit, Pirate Audio boards from Pimoroni, and LEDs!
Last week, we showed a classroom of fifty-five developers how easy it is to work with the SparkFun Edge Development Board using the Arduino IDE. Now we want to show you, too!
Tags
Recent Blog Comments
There are a ton of incredible possibilities for applications with SDR! Anywhere from diving deep into radio astronomy to building your own…
Welcome Avra! I'm looking forward to what you bring us! Things have certainly changed in the 55 or so years since I started tinkering with…
Really looking for fun stuff in low cost software defined radio.
No doubt that in about 2070 there will be some looking back on it fondly... ;-)
It all depends on conditions (temperature fluctuation, vibration, etc). In the case of the photo it is indoors and mounted to the wall with…
Thanks for the tip. But what about longevity? Does the dual lock hold up? I suppose it depends on the quality of the glue used and the…
Hi EJLANE, Thanks for chiming in here. It is great to hear that most people are having good luck with the paste lasting so long. I hope that…
I use 3M Dual lock for a lot of my projects and this being one of them. Allows me to remove electronics without tools and unless the project…
But what do you use to actually attach the boards to the lid/enclosure? The pictures show the boards sitting in the enclosure or on the lid…
Welcome! Looking forward to seeing what you create and share.